{"title":"Rotary Pads by GYEON","description":"\u003ch2\u003eMaximum Cutting Performance with GYEON Q²M Rotary Pads\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat are GYEON Rotary Pads? GYEON Q²M Rotary Pads are foam pads specifically developed for single rotary polishers, designed to effectively and precisely perform even severe paint corrections by specifically utilizing the higher speeds and stronger friction pressure of the rotary machine.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003cstrong\u003eGYEON Q²M Rotary Pads\u003c\/strong\u003e are the tool for demanding correction cases – where a dual-action machine reaches its limits. Due to its fixed axis of rotation, the rotary machine generates significantly more friction and heat than a DA machine. GYEON Rotary Pads are designed for these conditions: harder foam matrices prevent indentation at high speeds, special heat channels in the pad structure dissipate heat and protect the clear coat from overheating. The result is controlled, efficient cutting performance – even on heavily oxidized or scratched paint.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned for rotary machines and their specific loads.\u003c\/strong\u003e Thinner, softer DA pads would indent or work unevenly during rotation. GYEON Rotary Pads are designed in material thickness and foam density to remain stable and consistently powerful under rotary conditions – without vibration or padding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide cut depth coverage from compound to finish.\u003c\/strong\u003e Even with rotary pads, GYEON offers a complete gradation: from aggressive compounding pads to medium types and finishing variants that, despite the rotary principle, enable a hologram-free end result – provided the technique is correct.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat-resistant foam materials for continuous operation.\u003c\/strong\u003e In professional use, pads must work for several hours under load. GYEON Rotary Pads resist heat development in rotary machines without loss of shape or performance – this is not a nice-to-have in professional detailing, but a prerequisite.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e Rotary machines require more experience than DA polishers – especially with aggressive cut pads. Start with a low machine speed (1000–1500 RPM) and work your way up slowly. Always keep the machine moving – a stationary rotary pad can damage the paint within seconds due to overheating. GYEON Q²M Rotary Pads provide safety with the right technique – but do not replace practicing on test surfaces.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eRotary Machine vs. DA: When do you need Rotary Pads?\u003c\/h3\u003e\n\u003cp\u003eThe dual-action machine is sufficient for most correction cases in the hobby sector and for normal vehicle detailing. The rotary machine – and thus GYEON Rotary Pads – comes into play when the damage is deeper: heavily oxidized paint, deep single or spiderweb scratches, multiple paint layer damages, or vehicles with particularly hard clear coats. Also in commercial use, where speed is crucial, rotary is superior to DA. GYEON Rotary Pads ensure that the higher machine performance does not lead to uncontrolled cut depth, but can be precisely adjusted to the correction level.\u003c\/p\u003e\n\n\u003ch3\u003eApplication: Proper use and care of Rotary Pads\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Rotary Pads are attached to rotary polishers with a suitable backing plate (usually 80–150mm) using Velcro. Spread polish on the pad, not on the paint. Start the machine at a low setting first – this prevents splatters. Use even, overlapping movements with moderate pressure. Clean the pad regularly: a saturated rotary pad no longer transfers fresh abrasion, but smears old polish residue. After use, clean with warm water and mild shampoo, squeeze (do not wring), and let dry flat. This way, GYEON Rotary Pads will last for many uses.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of Use: Which Rotary Pad for which Correction Need?\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Rotary Cut Pad is the tool of choice for severe oxidation damage, deep scratches, and for detailing vehicles that have not seen polish for years. The Medium Rotary Pad covers the normal correction range – swirls, medium holograms, transition polishing after the cut pass. The Finishing Rotary Pad completes the correction with maximum gloss – the combination of rotary energy and fine foam structure creates a high-quality finish even without the risk of holograms, provided sufficient polish and patience are used. Afterwards, ceramic coatings from the \u003ca href=\"\/collections\/gyeon-quartz-beschichtungen\"\u003eGYEON Q² Coating range\u003c\/a\u003e are recommended.\u003c\/p\u003e\n\n\u003ch3\u003eGYEON Rotary Pads compared to other Rotary Pad manufacturers\u003c\/h3\u003e\n\u003cp\u003eRotary Pads from GYEON compete with established brands such as Rupes, Lake Country, or Koch-Chemie. The difference lies in system integration: GYEON has optimized its Rotary Pads to its own Q²M Compound and Polish formulations. This means that the abrasion behavior and heat development between the product and the pad are calibrated to each other. Other pads can be combined with GYEON polishes, but usually require more experience in finetuning. Those who use the GYEON system work with calculable parameters instead of trial-and-error.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase Recommendation: For Professionals and Ambitious Detailers\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Rotary Pads are recommended for anyone who already has experience with a rotary machine or plans to switch from DA to rotary. In professional use, several pads of each type should always be available to allow for uninterrupted changes. As a system addition, the \u003ca href=\"\/collections\/gyeon-q2m-lackpolituren\"\u003eGYEON Q²M Paint Polishes\u003c\/a\u003e are recommended – especially Q²M Compound for the cut pass and Q²M Polish for the finishing step. For less aggressive corrections or for beginners, we recommend \u003ca href=\"\/collections\/gyeon-q2m-exzenter-pads\"\u003eGYEON Eccentric Pads\u003c\/a\u003e for the DA machine.\u003c\/p\u003e","products":[{"product_id":"gyeon-q2m-rotary-eccentric-heavy-cut-polierpad","title":"Q²M Heavy Cut polishing pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eMaximum cutting power on the pad – GYEON Q²M Heavy Cut polishing pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Heavy Cut polishing pad? The GYEON Q²M Heavy Cut polishing pad is a hard correction pad for rotary and DA machines – built for aggressive defect correction with Q²M Compound+ or other heavy-cut compounds at maximum cut.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eWhen you're chasing deep scratches, heavy swirls or badly oxidised paint, the pad matters just as much as the compound. The \u003cstrong\u003eGYEON Q²M Heavy Cut polishing pad\u003c\/strong\u003e is the most aggressive foam pad in the GYEON polishing line-up – a hard cell structure that pulls every bit of cut out of the compound and still delivers on hard paint or extreme defects.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHard foam cell structure for maximum compound activation.\u003c\/strong\u003e How hard the pad is decides how aggressively the abrasives in the compound work the paint. The Heavy Cut pad puts maximum pressure into the surface and breaks the abrasives down fully – the highest correction power you get out of a foam pad.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast compound release so you keep moving.\u003c\/strong\u003e The Q²M Heavy Cut pad takes compound up quickly and lays it down evenly on the panel. The open-cell structure stops the compound drying out in the pad, so the cut stays constant right through the set.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRuns on both rotary and DA.\u003c\/strong\u003e The Q²M Heavy Cut pad works on both machine types – on the rotary you get the full cut for extreme defects, on the DA you keep serious correction with a lot more margin for error if you're not a veteran yet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Always start the Q²M Heavy Cut pad with a test spot somewhere out of sight – especially on soft paint (a lot of imports). Push the Heavy Cut pad too hard and you take off more clear than you meant to. Run speed 6–8 on the DA, 1000–1500 rpm on the rotary. After the correction step with Q²M Compound+ you finish with \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e and a soft pad, no shortcuts.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWhere the Heavy Cut pad earns its keep\u003c\/h3\u003e\n\u003cp\u003eYou grab the Q²M Heavy Cut pad when: deep scratches won't come out fully with a medium compound, the paint is oxidised and flat (cars that went years without any care), stubborn holograms from a bad earlier polish have to go, or a very hard paint (some BMW and Ferrari finishes) simply needs more bite. Heavy Cut pad + \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e is the combo for maximum correction – knowing full well that finishing with \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e + a soft pad always has to follow.\u003c\/p\u003e\n\n\u003ch3\u003eThe pad sequence for a full paint correction\u003c\/h3\u003e\n\u003cp\u003eOn badly defected paint we run a three-step pad sequence: Heavy Cut pad + \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e for the heavy correction, \u003ca href=\"\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut pad\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e to refine and pull out the holograms the Compound+ left behind, \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for the final gloss. Before the coating: \u003ca href=\"\/products\/gyeon-q2m-prep-entfetter-alkoholbasis\"\u003eQ²M Prep\u003c\/a\u003e as a last IPA wipe-down.\u003c\/p\u003e\n\n\u003ch3\u003eLooking after the Heavy Cut pad\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Heavy Cut pad is a tough bit of kit that survives plenty of jobs if you look after it. After every polishing session, clean it with a pad brush under running water and rinse every last bit of compound out. Let it dry lying flat. Heavy cut pads normally last longer than softer ones, because the firmer structure doesn't collapse as fast. Still: the moment the pad stops cutting evenly or starts lifting off the backing, replace it.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: the Q²M Heavy Cut pad for serious correction work\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M Heavy Cut polishing pad is the tool of choice for keen detailers and pros working on extreme defects or badly neglected paint. As a complete pad set we'd grab: Q²M Heavy Cut + \u003ca href=\"\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish\u003c\/a\u003e pad, paired with the GYEON polishing kit of \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e and \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for the best results.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335256088911,"sku":"D1-GYEON-Q2MRHC80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335260021071,"sku":"D1-GYEON-Q2MRHC145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337502204239,"sku":"D1-GYEON-Q2MEHC80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337502237007,"sku":"D1-GYEON-Q2MEHC146","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-heavy-cut-polierpad.png?v=1774633860"},{"product_id":"gyeon-q2m-cut-rotary-eccentric-polierpad","title":"Q²M Cut Polishing Pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eDefect correction with precision – GYEON Q²M Cut Polishing Pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Cut Polishing Pad? The GYEON Q²M Cut Polishing Pad is a medium-firm pad for rotary and dual-action machines – built for the correction stage with medium-cut compounds, with even compound pick-up and controlled heat build-up so you can work precisely.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe pad matters as much to the end result as the compound itself. The \u003cstrong\u003eGYEON Q²M Cut Polishing Pad\u003c\/strong\u003e is built for the correction stage of paint work – to run with \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e (medium cut) on both dual-action and rotary machines. The medium-firm foam cell strikes the right balance between compound pick-up, heat build-up and cut, so your defect correction stays controlled and repeatable.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium-firm foam cell that takes compound on and gives it back evenly.\u003c\/strong\u003e The foam structure of the Q²M Cut pad is dialled in for medium-cut compounds like Q²M Compound – the pad soaks the compound up evenly and releases it onto the paint in a controlled way, so the finish comes out uniform.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControlled heat build-up keeps the paint out of trouble.\u003c\/strong\u003e Too much heat while polishing can damage paint – especially soft paint or wrapped panels. The Q²M Cut pad is built so the heat stays in the safe zone, even when you push the machine settings.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJust as happy on a dual-action as on a rotary.\u003c\/strong\u003e The Q²M Cut Polishing Pad runs on both machine types – on the dual-action for safer, more forgiving passes, on the rotary when you want more cut. The pad holds its shape, so results stay consistent whichever machine you grab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Prime the Q²M Cut pad before its first job with a small amount of compound (spread 3–4 drops across the pad and run it in on a piece of cardboard with no pressure). That loads the pad evenly and saves you a patchy first pass. Clean the pad regularly with a pad brush – a clogged pad loses a serious chunk of its cut.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePicking a pad in the GYEON polishing system: which pad for which job?\u003c\/h3\u003e\n\u003cp\u003eGYEON built its pads as one matched system. The \u003ca href=\"\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy Cut pad\u003c\/a\u003e for heavy defects with Compound+, the Q²M Cut pad for medium defects with Q²M Compound, the \u003ca href=\"\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish pad\u003c\/a\u003e for fine correction and the \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e for the last pass and coating prep. On top of that come the lambswool pads for the rotary (\u003ca href=\"\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003eHeavy Cut\u003c\/a\u003e and \u003ca href=\"\/products\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau\"\u003eCut\u003c\/a\u003e) when you want maximum cut.\u003c\/p\u003e\n\n\u003ch3\u003ePad care and how long a pad lasts\u003c\/h3\u003e\n\u003cp\u003ePolishing pads are wear parts, but treat them right and they last a lot longer. After every polishing session, clean the pad with a pad brush or a pad washer – compound left sitting in the foam kills your cut and can put scratches back in. The Q²M Cut pad cleans up gently with water and mild soap, and once it is dry it goes straight back to work. A clean pad always beats an old, saturated one.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to pair it with: Q²M Cut pad and compound\u003c\/h3\u003e\n\u003cp\u003eThe go-to combo for medium defect correction: Q²M Cut pad + \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e on the dual-action (speed 5–7) or the rotary (1200–1500 rpm). That pairing pulls out everyday swirls, wash marks and light holograms in a single pass. For the finishing step after it: \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eQ²M Finish pad\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for the final depth of gloss. The matched system gets you professional results you can repeat.\u003c\/p\u003e\n\n\u003ch3\u003eThe Q²M Cut pad on different types of car\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Cut pad works on every automotive paint – from soft import clearcoats to hard German premium paint. On soft paint: lower speed and less pressure. On hard paint: crank the speed up and you can lean on the pad more. With very soft paint or on a hot day, keep checking that the panel is not overheating. The pad itself is tough and lasts.\u003c\/p\u003e\n\n\u003ch3\u003eWho it is for: the Q²M Cut pad for correction work\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M Cut Polishing Pad is the one you reach for at the correction step of any proper paint job. If you are starting out, run it on the dual-action – safe, forgiving and still effective. As a complete polishing kit: \u003ca href=\"\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy Cut pad\u003c\/a\u003e + Q²M Cut pad + \u003ca href=\"\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish pad\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e – together with \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e and \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335257596239,"sku":"D1-GYEON-Q2MRC80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335260938575,"sku":"D1-GYEON-Q2MRC145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337615843663,"sku":"D1-GYEON-Q2MEC80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337615876431,"sku":"D1-GYEON-Q2MEC145","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-cut-rotary-eccentric-polierpad.png?v=1774636477"},{"product_id":"gyeon-q2m-polish-rotary-eccentric-polierpad","title":"Q²M Polish Polishing Pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eFine correction and gloss in one pad – GYEON Q²M Polish polishing pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Polish polishing pad? The GYEON Q²M Polish polishing pad is a soft to medium foam pad for rotary and dual-action machines – built for fine correction and gloss refinement with Q²M Polish, sitting between the correction step and the final finishing pass.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn the GYEON pad line-up, the Q²M Polish pad sits between correction and finishing – softer than the \u003ca href=\"\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut pad\u003c\/a\u003e, but still a touch more aggressive than the \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e. Paired with \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e you get a single pass that does the fine correction (light compound holograms) and builds gloss at the same time.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSoft-to-medium foam cell design for fine correction and gloss.\u003c\/strong\u003e The Q²M Polish pad is firmer than a pure finishing pad but softer than a correction pad – exactly the hardness you want for the fine-correction stage, where you clear the last compound holograms and pull maximum gloss out of the paint at the same time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTuned for Q²M Polish – clean product release.\u003c\/strong\u003e The foam cell structure of the Polish pad is matched to how fine the Q²M Polish abrasives are: it picks the polish up and lays it back down evenly, so the result stays consistent and streak-free across the whole panel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRuns on rotary and dual-action machines.\u003c\/strong\u003e You can use the Q²M Polish pad on both machine types – on the DA for safe, forgiving finishing, on the rotary at low speed for serious gloss on big panels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e Run the Q²M Polish pad at medium machine speed (DA setting 5–6, rotary 1000–1200 rpm). Take the last pass on each panel slow and overlapping – that is how you keep it streak-free. After the polishing step, check the result under a halogen or LED work lamp: fine holograms are much harder to spot in direct sunlight than under artificial raking light.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Q²M Polish pad in a three-stage polish\u003c\/h3\u003e\n\u003cp\u003eIn a three-stage polish the Polish pad takes the middle slot: \u003ca href=\"\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy Cut pad\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e for heavy defects → Q²M Polish pad + \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e for fine correction and the first round of gloss → \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e + Q²M Polish for the final refinement. The Polish pad knocks the Compound+ holograms back and already does most of the gloss work – which leaves the closing finish step as a short but important tidy-up.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Polish pad for a one-step polish\u003c\/h3\u003e\n\u003cp\u003eOn cars with light to medium defects, the Polish pad + Q²M Polish works as your only polishing combo in a one-step. The Polish pad has enough bite for fine swirls and wash marks and enough softness for high gloss without holograms. That combination is ideal for the yearly refresh polish on a well-kept car – no compound needed, minimal clear coat taken off, best possible result.\u003c\/p\u003e\n\n\u003ch3\u003ePad care and service life\u003c\/h3\u003e\n\u003cp\u003eLook after the Q²M Polish pad and it lasts. Clean it with a pad brush under running water after every polishing session. The finer foam structure of the Polish pad (softer than Heavy Cut or Cut) takes heavy loading less well – when the machine work gets brutal, switch to firmer pads and spare the Polish pad. Dry it flat, and never store it compressed.\u003c\/p\u003e\n\n\u003ch3\u003eBuying tip: the complete GYEON polishing pad system\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Polish polishing pad is a core part of the complete GYEON polishing system. As a full set: \u003ca href=\"\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy Cut pad\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut pad\u003c\/a\u003e + Q²M Polish pad + \u003ca href=\"\/products\/gyeon-q2m-finish-rotary-eccentric-polierpad\"\u003eFinish pad\u003c\/a\u003e – all four polishing stages covered. Add the lambswool pads (\u003ca href=\"\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003eRotary Wool Heavy Cut\u003c\/a\u003e and \u003ca href=\"\/products\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau\"\u003eRotary Wool Cut\u003c\/a\u003e) for the rotary and you have the most complete polishing pad set-up for professional paint correction.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335258677583,"sku":"D1-GYEON-Q2MRP80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335260971343,"sku":"D1-GYEON-Q2MRP145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337723191631,"sku":"D1-GYEON-Q2MEP80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337723224399,"sku":"D1-GYEON-Q2MEP145","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-polish-polierpad.png?v=1774638526"},{"product_id":"gyeon-q2m-finish-rotary-eccentric-polierpad","title":"Q²M Finish Polishing Pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eThe last step to a flawless gloss – GYEON Q²M Finish polishing pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Finish polishing pad? The GYEON Q²M Finish polishing pad is a soft finishing pad for rotary and DA machines – built for the last polishing stage with finishing compounds, for maximum depth of gloss and a hologram-free surface ready for coatings.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe finish pad is what crowns every paint correction job. \u003cstrong\u003eGYEON Q²M Finish polishing pad\u003c\/strong\u003e is built for the final polishing stage with \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e – a soft, fine foam cell structure that takes up finishing compounds and lays them down evenly on the paint. What you get is a hologram-free, high-gloss finish – the perfect base for a ceramic coating, or the end result of a full correction.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSoft foam cell structure for gentle finishing without holograms.\u003c\/strong\u003e The Q²M Finish pad is the softest pad in the GYEON polishing system – made for the finishing phase, where you no longer want cut, just perfect spread and gloss build-up. That soft structure keeps holograms from forming on the finishing pass.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDialled in for GYEON Q²M Polish – the combo for deep gloss.\u003c\/strong\u003e Pad and polish are matched to each other: the Q²M Finish pad spreads the fine abrasives in Q²M Polish evenly and pulls the full gloss potential out of the finishing compound – maximum depth of gloss from the very last polishing step.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRuns on both DA and rotary machines – versatile.\u003c\/strong\u003e The Q²M Finish pad works on either machine type. On a DA it gives you soft, streak-free results – ideal for the finishing pass on freshly corrected paint. On a rotary at low speed it also earns its keep on gloss-refining passes after the correction step.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e To get the best out of the Q²M Finish pad: mist the pad lightly (one spritz of water on the face) before you lay the compound down – that stops the compound drying into the pores. On a DA, work at medium speed (5–6) – too much speed on a soft finish pad kills the polishing load. When you are done, clean the pad straight away with a pad brush and water.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe GYEON polishing system: which pad for which step?\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M polishing system is laid out clearly: heavy defect correction is the job of the \u003ca href=\"\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy Cut pad\u003c\/a\u003e with \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e. Medium correction goes to the \u003ca href=\"\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut pad\u003c\/a\u003e with \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e. The \u003ca href=\"\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish pad\u003c\/a\u003e with Q²M Polish handles fine correction and high-gloss build-up, and finally the Q²M Finish pad with Q²M Polish for the absolute finishing touch – hologram-free, deep gloss, coating-ready. Every pad has its clearly defined slot in the sequence.\u003c\/p\u003e\n\n\u003ch3\u003eFinishing: the step that makes the difference\u003c\/h3\u003e\n\u003cp\u003ePlenty of paint jobs stop after the correction step – the paint looks good, but not perfect. Finishing with a soft pad and a finishing compound takes the result to another level: the last fine holograms and buffer trails from the correction step go away, gloss gets pushed to the max, and the surface is prepped for a ceramic coating. With the Q²M Finish pad and \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e that step is easy to run and gives you consistently excellent results.\u003c\/p\u003e\n\n\u003ch3\u003ePad care for a long service life\u003c\/h3\u003e\n\u003cp\u003ePolishing pads are an investment that will see out plenty of sessions if you look after them. Clean the Q²M Finish pad after every session with a pad brush under running water – flush the compound residue out of the pores. Let the pad air-dry lying flat – never squeeze it or store it squashed in a tight box. A clean, well-kept pad reliably beats an old, saturated one.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: Q²M Finish pad for the perfect finish on your paint\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M Finish polishing pad is the last link in a professional paint correction – and the one that decides the final impression. Skip the finish pad and you give away gloss and risk visible holograms under the coating. For a complete pad set we would go: \u003ca href=\"\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy Cut\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut\u003c\/a\u003e + \u003ca href=\"\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish\u003c\/a\u003e + Finish pad, paired with the full GYEON polishing kit of \u003ca href=\"\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, \u003ca href=\"\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e and \u003ca href=\"\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335258841423,"sku":"D1-GYEON-Q2MRF80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335261004111,"sku":"D1-GYEON-Q2MRF145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337737412943,"sku":"D1-GYEON-Q2MEF80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337737445711,"sku":"D1-GYEON-Q2MEF145","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-finish-polierpad.png?v=1774638886"},{"product_id":"gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss","title":"Q²M Rotary Wool Heavy Cut Polishing Pad \/ Lambswool (White)","description":"\u003ch2\u003eMaximum cut for the hardest cases – GYEON Q²M Rotary Wool Heavy Cut polishing pad, white\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eWhen do I need a heavy-cut pad, and when is a regular cut pad enough?\u003c\/strong\u003e\u003cbr\u003e\nA regular cut pad handles medium to heavy defects just fine – holograms, swirls, surface scratches. A heavy-cut pad like the GYEON Q²M Rotary Wool Heavy Cut in white is what you keep back for the worst of it: scratches ground in deep, heavy oxidation, stubborn water spots etched into the paint, and cars that have gone years without any care at all. That is where you need maximum cut – and that is exactly what the heavy-cut pad gives you.\n\u003c\/blockquote\u003e\n\n\u003cp\u003eSome cars are simply past what normal correction can fix. Paint that has oxidised under years of sun. Deep scratches picked up in automatic washes. Etched water spots that have changed the surface structure for good. The GYEON Q²M Rotary Wool Heavy Cut polishing pad in white is built for exactly those extremes: the most aggressive pad in the GYEON line-up, dialled in for maximum cut on a rotary. The pad for pros who do not get a second go at it.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cutting power:\u003c\/strong\u003e the heavy-cut pad delivers the highest cut in the GYEON pad line-up – for defects that would cost you far too many passes with a normal cut pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick lambswool fibres that reach deeper:\u003c\/strong\u003e the longer, denser wool fibres bite further into the paint surface and pull out even defects that sit deep down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for rotary work:\u003c\/strong\u003e designed for high rotational speeds and the extra energy a rotary puts in – full performance without the heat running away from you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eDaniel's tip from the day-to-day:\u003c\/strong\u003e A heavy-cut pad is a pro tool and it demands respect. Always start with a test spot to find the right compound-and-pad combination and the right machine setting. Too much pressure or too many revs will hurt even hard paint. After the heavy-cut step, plan for at least two finishing stages: first the \u003ca href=\"\/products\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau\"\u003eQ²M Rotary Wool Cut in grey\u003c\/a\u003e for the middle stage, then a fine finishing pad for the gloss.\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eWhere it belongs: the defects that call for heavy cut\u003c\/h3\u003e\n\u003cp\u003eHeavy-cut pads are for extreme cases – in day-to-day detailing the regular cut pad does the job. Typical heavy-cut situations: cars with neglected paint after several years without a proper correction, cars carrying deep tunnel-wash holograms that a normal compound pad does not pull out completely, or badly oxidised metallics that you simply cannot save without aggressive cut.\u003c\/p\u003e\n\u003cp\u003ePrepping a car for a wrap or paint protection film (PPF) often calls for a heavy-cut step too, so the defects are gone before the film goes on. Once PPF is applied nothing underneath can be corrected any more – a full heavy-cut step here is not perfectionism, it is doing the job properly.\u003c\/p\u003e\n\n\u003ch3\u003eGetting the combination right: pad, polish and machine\u003c\/h3\u003e\n\u003cp\u003eThe heavy-cut pad only shows what it can do with a strongly cutting compound and a rotary with real power. Not every polish suits this job – the compound needs enough abrasive to work with the fibre structure of a lambswool pad. A polish that is too fine on a heavy-cut pad just gets you overheating and uneven cut.\u003c\/p\u003e\n\u003cp\u003eThe machine setting counts just as much. With the Rotary Wool Heavy Cut, do not go straight to full speed – work the pad and the polish in at medium revs first, then step it up. Constant movement, even pressure, never standing still on one spot. That is how you avoid hot spots that damage the paint for good.\u003c\/p\u003e\n\n\u003ch3\u003eThe workflow after the heavy cut\u003c\/h3\u003e\n\u003cp\u003eThe heavy-cut step is only ever the first in a multi-stage polishing sequence. The marks the Wool Heavy Cut leaves behind – fine, circular buffer trails – have to come out in the following steps. The standard route: after the heavy cut, take the \u003ca href=\"\/products\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau\"\u003eGYEON Q²M Rotary Wool Cut in grey\u003c\/a\u003e with a medium polish to clear the coarsest marks, then bring up the gloss with a finishing pad and a final polish.\u003c\/p\u003e\n\u003cp\u003eAfter that three-stage process the paint is ready for protection. Depending on the car and what the customer wants, that means a carnauba wax, a straightforward sealant or a proper ceramic coating. If you want fast, reliable single-layer protection, \u003ca href=\"\/products\/gyeon-q2m-wetcoat-nassversiegelung\"\u003eGYEON Q²M WetCoat\u003c\/a\u003e is an excellent option straight after the final wash.\u003c\/p\u003e\n\n\u003ch3\u003ePad care and how long it lasts\u003c\/h3\u003e\n\u003cp\u003eLambswool pads are tougher than foam pads, but they ask for more care. Clear the polish residue out with a pad washer right after every use – hardened compound wrecks the fibre structure and costs you cut permanently. After the session, wash it out in clean water or with pad shampoo, squeeze it out (do not wring it), and air-dry it flat or hanging.\u003c\/p\u003e\n\u003cp\u003eLooked after regularly and properly, a quality lambswool pad like the Q²M Rotary Wool Heavy Cut is good for a lot of jobs. It pays for itself far faster than cheaper pads that lose their cut after a handful of cars.\u003c\/p\u003e\n\n\u003ch3\u003eWho should be reaching for the heavy-cut pad?\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Rotary Wool Heavy Cut is clearly a pro tool. If you have no experience with a rotary, do not start with the most aggressive pad – the risk of overheating and paint damage is real. For experienced detailers and pros, on the other hand, it is the one tool you cannot do without when nothing else is enough.\u003c\/p\u003e\n\u003cp\u003eFor anyone working professionally, heavy-cut pads are basic kit. If you regularly bring badly neglected cars back into shape, for dealers, leasing companies or private restorations, you need this tool. Paired with the right compound and a powerful rotary, the GYEON Q²M Rotary Wool Heavy Cut gets results that no other pad reaches this efficiently.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335259038031,"sku":"D1-GYEON-Q2MRWHC80","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 130 mm (1 piece)","offer_id":57335261102415,"sku":"D1-GYEON-Q2MRWHC130","price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss.png?v=1774632482"},{"product_id":"gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau","title":"Q²M Rotary Wool Cut Polishing Pad \/ Lambswool (Grey)","description":"\u003ch2\u003eLambswool power for the rotary – GYEON Q²M Rotary Wool Cut polishing pad, grey\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eWhat's the difference between a lambswool pad and a foam polishing pad?\u003c\/strong\u003e\u003cbr\u003e\nFoam pads work with even pressure and are easy to control – but with deep scratches and heavy holograms they hit their limits. Lambswool pads like the GYEON Q²M Rotary Wool Cut cut more aggressively, because the natural fibres, with their three-dimensional structure, put more mechanical energy into the paint. The result: far faster removal on demanding defects – made for rotary machines that can actually deliver that power.\n\u003c\/blockquote\u003e\n\n\u003cp\u003eHeavy paint defects – deep scratches, stubborn holograms, oxidised paint or the classic cobweb effect on neglected cars – need real removal, not a half-hearted polish. The GYEON Q²M Rotary Wool Cut polishing pad in grey is built for exactly these jobs: a lambswool pad for rotary work that chews through deep defects efficiently. The choice for pros who know that real correction doesn't come without real graft.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh cutting power from natural fibre:\u003c\/strong\u003e the lambswool fibres bite mechanically into the paint and strip defects efficiently – more removal per minute than comparable foam pads of the same grade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuned for rotary machines:\u003c\/strong\u003e the pad is designed for the higher rotational speeds and the linear energy input of rotary polishers – that maximises cutting power and keeps unnecessary heat down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-lasting and reusable:\u003c\/strong\u003e looked after properly, lambswool pads outlast aggressive foam pads by a mile – the fibres bounce back after cleaning and hold their cutting power over many jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eDaniel's hands-on tip:\u003c\/strong\u003e Don't start the Rotary Wool Cut at too high a speed – kick off at a medium speed (1200–1500 rpm) to work the pad in and spread the polish. At full speed without enough product you're risking uneven removal and hot spots. After the job, wash the pad out thoroughly with a pad washer or under running water and hang it up to dry – that's how the fibre structure stays intact.\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eRotary vs. DA: when do I need the Rotary Wool Cut?\u003c\/h3\u003e\n\u003cp\u003eDual-action machines are the everyday tool for most detailers – safe, forgiving and, with good pads, up to medium correction too. But on heavy holograms, oxidation or deep defects in hard paint, DA machines run out of road. That's where the rotary comes in: the continuous rotation delivers more mechanical energy, and the lambswool pad transfers that energy onto the surface efficiently.\u003c\/p\u003e\n\u003cp\u003eThe Q²M Rotary Wool Cut in grey is the more aggressive counterpart to the white heavy-cut pad – built for control-cut jobs, where you want removal with control. For maximum removal, there's the \u003ca href=\"\/products\/gyeon-q2m-rotary-wool-heavy-cut-polierpad-lammfell-weiss\"\u003eGYEON Q²M Rotary Wool Heavy Cut\u003c\/a\u003e in white. After the correction stage with the Rotary Wool Cut, you'll usually follow up with a finishing polish on a less aggressive pad to take out the working marks completely.\u003c\/p\u003e\n\n\u003ch3\u003eSuitable polishes for the Rotary Wool Cut\u003c\/h3\u003e\n\u003cp\u003ePicking the right polish makes or breaks the result. With the Rotary Wool Cut you can run heavy-cutting compounds efficiently – the pad speeds up the removal and cuts down the number of passes. The polish should carry enough abrasives to work in harmony with the pad. Polishes that are too fine on an aggressive lambswool pad can lead to overheating and uneven removal.\u003c\/p\u003e\n\u003cp\u003eAfter the correction stage, always follow up with a finishing pad and a finishing polish to fully wipe out the fine working marks left by the aggressive cutting. The goal is always a hologram- and scratch-free, deep-gloss paint that's ready for the final sealant.\u003c\/p\u003e\n\n\u003ch3\u003ePad care for maximum lifespan\u003c\/h3\u003e\n\u003cp\u003eLambswool pads are an investment that pays off long-term when you look after them. After every job the pad should be cleaned thoroughly – ideally with a pad washer while you're polishing, and after the session under running water or in a bucket with pad wash. The fibres have to be cleared completely of polish residue, which otherwise clumps up and knocks the cutting power down for good.\u003c\/p\u003e\n\u003cp\u003eAfter washing, air-dry the pad – never in the tumble dryer, since heat wrecks the fibre structure. Store it dry and dust-free, ideally in a protective sleeve. A well-kept lambswool pad can see out dozens of jobs and still deliver consistent cutting power.\u003c\/p\u003e\n\n\u003ch3\u003eThe cut pad in the correction workflow\u003c\/h3\u003e\n\u003cp\u003eThe typical workflow with the Q²M Rotary Wool Cut: assess the paint, set your machine (speed, pressure, feed rate), work a test spot with the pad and a suitable compound, check the result. Only then take on the whole area. Always go panel by panel, never the whole car at once.\u003c\/p\u003e\n\u003cp\u003eAfter the Rotary Wool Cut comes the finishing stage – here a finishing pad and a final polish do the job, taking out the working marks from the Wool Cut and bringing the paint up to a high gloss. To finish, the car should be sealed with a coating or wax. The \u003ca href=\"\/products\/gyeon-q2m-wetcoat-nassversiegelung\"\u003eGYEON Q²M WetCoat\u003c\/a\u003e gives you a quick way to seal straight after the last wash.\u003c\/p\u003e\n\n\u003ch3\u003eWho the Q²M Rotary Wool Cut is the right choice for\u003c\/h3\u003e\n\u003cp\u003eThe Q²M Rotary Wool Cut is aimed at experienced detailers and pros who work with the rotary and want a reliable, high-performance lambswool pad for correction work. For beginners and DA users we'd suggest starting out with foam pads and a DA machine first – running a rotary with wool takes experience and a feel for machine pressure and heat build-up.\u003c\/p\u003e\n\u003cp\u003eIf you're regularly correcting hard-worn cars – ex-fleet, lease returns or cars with neglected paint – you'll come to rate the Q²M Rotary Wool Cut as an indispensable tool in your pad line-up.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335259103567,"sku":"D1-GYEON-Q2MRWC80","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 130 mm (1 piece)","offer_id":57335261167951,"sku":"D1-GYEON-Q2MRWC130","price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-rotary-wool-cut-polierpad-lammfell-grau.png?v=1774632020"}],"url":"https:\/\/detailing1depot.com\/collections\/gyeon-q2m-polishing-rotary-pads.oembed","provider":"Detailing1","version":"1.0","type":"link"}