{"title":"Fixing leather dye before washing — COLOURLOCK","description":"\u003ch2 id=\"speakable-headline\"\u003eThe white cloth makes the call before a leather wash\u003c\/h2\u003e\n\u003cp id=\"speakable-summary\"\u003e\u003cem\u003e\u003cstrong\u003eFixing leather dye\u003c\/strong\u003e means locking loose dyes down in the material before the wash. COLOURLOCK \"Leather Fixative\" is a pre-treatment for washable leather items, not a detergent and not a re-dye. Whether you need it at all shows up on a damp white cloth on a hidden spot.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eCOLOURLOCK \"Leather Fixative\"\u003c\/strong\u003e gets dyed leather clothing, leather-textile combinations and other expressly washable leather items ready for contact with water. The fixing works against dyes that can travel out of the material once moisture and movement come into play. It goes in front of the wash concentrate: test, pre-treat in the fixative bath, let it drip, then wash to suit the material and dry it slowly.\u003c\/p\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTest\u003c\/th\u003e\n\u003ctd\u003eA dampened white cloth on a hidden spot tells you whether colour is coming off.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePre-treatment\u003c\/th\u003e\n\u003ctd\u003eWhere the need is real, the washable leather sits in the fixing solution for about 60 minutes and drips off afterwards.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWash\u003c\/th\u003e\n\u003ctd\u003eOnly then comes the matching leather wash concentrate; fixative and cleaner do separate jobs.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat does the white cloth tell you besides colour fastness?\u003c\/h3\u003e\n\u003cp\u003eA deliberate rub test tells you before wash day whether water and movement will mobilise loose dye, and whether fixing is worth doing at all.\u003c\/p\u003e\n\n\u003cp\u003ePick a hidden spot on the same leather, say under a facing or on an inside edge. Damp the cloth with clean water and draw it across the zone with even, moderate pressure. Colour on the cloth is a warning. Dirty grey, on the other hand, can be dust or old care product. That is why the test spot has to be dry and superficially clean beforehand.\u003c\/p\u003e\n\n\u003cp\u003eMulti-coloured pieces need several test points. Red leather can be rock solid while a black trim gives colour up freely. A light textile lining makes the migration visible later, even where the loss on dark leather barely registers. On a set of motorcycle leathers you check every colour family, and the joins in particular. One clean white patch is no free pass for the whole garment.\u003c\/p\u003e\n\n\u003cp\u003eIf the cloth stays clean, this test neither justifies fixing nor rules it out in principle. What still decides is the care label on the piece and the material combination. On known, heavily dyed or high-contrast leather-textile pieces, a fixing step can be part of the intended system anyway. And with no clearance for washing, a clean cloth must not tempt you into the machine.\u003c\/p\u003e\n\n\u003cp\u003eSo fixing leather dye starts as a diagnosis, not at the measuring jug. That small difference saves you unnecessary baths and at the same time keeps a visibly bleeding piece out of the wash water unprotected. The test measures no guarantee; it makes the risk something you can hold on to and hands you a clear next step.\u003c\/p\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eTest seam allowances, strong edges and the join to a light lining separately.\u003c\/strong\u003e That is usually where colour migration turns up first. Photograph the dampened white cloth after 30 seconds next to the dry leather. It makes weak dye transfer, shadow and old dirt far easier to tell apart when you compare later on.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003ch3\u003eWater carries loose dye right through the piece\u003c\/h3\u003e\n\u003cp\u003eMoisture works into leather fibres and can carry unbound dyes over to seams, lining and lighter leather zones.\u003c\/p\u003e\n\n\u003cp\u003eOn dry leather that movement usually stays invisible. It takes water to fill the fine paths in the material. Detergent drops the surface tension on top of that, and the movement in a tub or a drum spreads the liquid through folds and double layers. Dye migration is the technical name for that transport. What you see is coloured wash water, a discoloured lining or edges that bleed.\u003c\/p\u003e\n\n\u003cp\u003eOpen-pored leathers like aniline or nubuck carry no closed pigment layer across the whole surface. Their entire look lives off the natural fibre and the way it drinks. That makes them more demanding once moisture is involved. Fixing is meant to stabilise the loose dyes that are there without laying a visible top layer over the leather. So it is a different thing from a Top Coat on pigmented smooth leather.\u003c\/p\u003e\n\n\u003cp\u003eTextile inserts sharpen the problem. Light fabric fibres take dissolved dye on quickly and hold it exactly where it was never meant to be. On a black-and-white suit, the black leather area can still look fine after the wash while the white seam has gone grey. The damage shows on the receiving surface, not necessarily at the source.\u003c\/p\u003e\n\n\u003cp\u003eTemperature and time steer that movement as well. Hot water is no accelerator leather has any use for. It raises the load on dye and fibre, while the fixing solution works with lukewarm water and a planned dwell time. Cut the sequence short and turn the heat up instead, and the result gets harder to predict.\u003c\/p\u003e\n\n\u003cp\u003eThe same principle explains water marks on natural leathers. The liquid travels outwards, evaporates at the edge and leaves concentrated dye or tannins sitting there. A spot-wet treatment can build a bigger ring than the original stain. On washable items, even and complete wetting is easier to steer than a wet sponge in the middle of a dry panel.\u003c\/p\u003e\n\n\u003ch3\u003eFixative first, detergent after\u003c\/h3\u003e\n\u003cp\u003eCOLOURLOCK \"Leather Fixative\" stabilises the colour situation before the clean, while the wash concentrate then lifts sweat, grease and dirt.\u003c\/p\u003e\n\n\u003cp\u003eThe roles are not interchangeable. The \u003ca href=\"\/products\/koch-chemie-colourlock-leather-fixative-farbfixierer\"\u003ecolour fixative\u003c\/a\u003e is no detergent and is not there to wash the garment clean. And the leather wash concentrate cannot stabilise loose dye by cleaning harder. Tip both into one tub and the clear order loses its point: secure the colour first, wash the dirt out after.\u003c\/p\u003e\n\n\u003cp\u003eSo if you want to fix leather dye, you plan two separate baths with a clean handover. The pre-treatment stays on the material until the wash follows straight on. A longer stop in between, or a rinse, adds nothing and takes away part of what was meant to be there for the water contact to come.\u003c\/p\u003e\n\n\u003cp\u003eIn the fixative bath, the solution has to reach the face, the back, the folds and the seams. The piece must be wetted right through and moved about now and then across the roughly 60 minutes. That is how you keep air pockets and dry creases out of it. After the bath, the leather is only left to drip. Rinsing would take away part of the pre-treatment you have just put there.\u003c\/p\u003e\n\n\u003cp\u003eDosing goes by the maker's figures and the size of the job. As a rough guide, the existing product world quotes about 50 millilitres to 5 to 10 litres of lukewarm water; a complete set of motorcycle leathers needs correspondingly more bath and more solution. The label on your pack stays the authority for that pack. Guessing from the colour of the water or the weight of the leather is no reliable alternative.\u003c\/p\u003e\n\n\u003cp\u003eThe actual clean follows with the \u003ca href=\"\/collections\/koch-chemie-colourlock-reinigung-waschkonzentrat\"\u003eCOLOURLOCK leather wash concentrate\u003c\/a\u003e and a programme cleared for the item. Fixing, washing and feeding the leather back afterwards form one chain. Look only at the middle step and you get a clean piece while colour or suppleness goes missing. Thinking in systems is exactly what stops that swap.\u003c\/p\u003e\n\n\u003ch3\u003eSixty minutes in the bath want watching\u003c\/h3\u003e\n\u003cp\u003eWhile the leather soaks, full wetting and gentle movement make sure the fixing solution reaches the edges, the folds and the double layers too.\u003c\/p\u003e\n\n\u003cp\u003eSet the bath up big enough. A jacket squashed into a small bowl has dry inner folds and concentrated contact points. The piece should be able to lie loosely under the water. Press trapped air out with your hand and move the leather panels against each other every so often, without wringing them. Gloves keep it off your skin while you do it.\u003c\/p\u003e\n\n\u003cp\u003eWatch the water without turning every faint tint into a reason to abort. Heavy bleeding wants attention; the final judgement still comes after the intended sequence and a fresh cloth test. With leather that bleeds very strongly, a repeat can be necessary. That justifies a second separate run, not an arbitrarily higher concentration.\u003c\/p\u003e\n\n\u003cp\u003eAfter the bath there is no interim wash in the sink. Lift the piece, let the surplus solution run off and take it straight to the intended wash step. Keep an eye on the light, non-leather parts while you do. If colour is showing there before the wash has even started, document the state. Otherwise you cannot tell later whether the transfer happened in the bath or in the machine.\u003c\/p\u003e\n\n\u003cp\u003eFirst time round, an hour of dwell time passes while you are actively working for only a few minutes. Build that wait in rather than cutting it short with heat or hard kneading. Leather care pays you back for time you planned for. The work happens inside the material; your part is making sure every zone gets the same chance and that haste does not make the process uneven.\u003c\/p\u003e\n\n\u003ch3\u003eColour-fast is not yet clearance to wash\u003c\/h3\u003e\n\u003cp\u003eA clean rub test and a fixing step replace neither the care label nor a look at bonded parts, inserts and material combinations.\u003c\/p\u003e\n\n\u003cp\u003eThe fixative does not re-dye. A spot that has already faded stays faded after the wash, and pigmentation rubbed through needs a colour build. Nor does it clear old dye transfer out of a lining. Its job sits before all that: stabilising the loose dyes that are there, as far as intended, before a lot of water sets them moving.\u003c\/p\u003e\n\n\u003cp\u003eBonded reinforcements can draw their own line. Water and movement load adhesives, padding and interlayers differently from the leather itself. The visible leather surface holding up in the cloth test says nothing about a hidden bond. Bags with a card insert, stiff peaks, protector pockets and glued-on decoration all need an item-specific check.\u003c\/p\u003e\n\n\u003cp\u003eThe machine is no neutral container either. Spin speed, temperature and friction work on seams and shape. You wash only what is cleared for that route, at low load, and you do not carry your normal textile routine across. If the suitability stays unclear, a gentle hand clean or a professional question is more sensible than a test on a full programme.\u003c\/p\u003e\n\n\u003cp\u003eIf the cloth stays white and the piece is single-coloured, robust and expressly washable, the wash concentrate on its own can be enough. If colour comes off, or light and dark areas meet, fixing belongs in front of the wash. If the construction or the label says otherwise, the machine route ends there whatever the colour result.\u003c\/p\u003e\n\n\u003cp\u003eFur and shearling items bring another construction with them: the leather side and the hair react in the same bath but do not dry at the same speed. Fixing does not settle that material tension. Pieces like that need room, a long dry and movement matched to the article. Look only at the colour and you can get a clean colour result and still lose shape or handle.\u003c\/p\u003e\n\n\u003cp\u003eLeather in a vehicle sits outside this collection too. Seat covers do not come off and go in the drum just because their surface looks pigmented and colour-fast. There you clean and care for one section at a time. Leather Fixative answers the specific question of washable leather items; that clear line makes the job safer and the product choice simpler.\u003c\/p\u003e\n\n\u003ch3\u003eDrying is what brings leather back to life\u003c\/h3\u003e\n\u003cp\u003eAfter fixing and washing, slow drying with repeated working is what decides whether the leather comes back supple and in shape.\u003c\/p\u003e\n\n\u003cp\u003eLay the piece out at room temperature in its natural shape. Tumble dryers, radiators and direct sun pull moisture out too fast and can harden fibres or warp components. A hanger can stretch the shoulders on a heavy wet jacket; drying flat spreads the weight better. Turn the item regularly so double layers do not stay wet for long.\u003c\/p\u003e\n\n\u003cp\u003eAs the leather goes from wet to just damp, you keep working it gently and pulling it back into shape. Folds, sleeves and stiff zones want the attention there. Small, repeated movements are enough; aggressive flexing would be too much. On nap leather, the pile only gets lifted with a suitable brush once it has dried enough.\u003c\/p\u003e\n\n\u003cp\u003eAlong with the dirt, the wash takes part of the nourishing content with it. So once it is dry right through, the matching \u003ca href=\"\/collections\/koch-chemie-colourlock-pflege\"\u003eCOLOURLOCK leather care\u003c\/a\u003e follows. Which product fits is again a question of the leather type. Smooth-leather care on nubuck would be the same category mistake as a fixative used as detergent: a good product in the wrong place.\u003c\/p\u003e\n\n\u003cp\u003eFinish by going over it with the white cloth again, on strongly dyed edges above all. The result describes this wash run and promises nothing about every future soaking. If the spot still gives colour up clearly, you do not wash hotter or dry harder. What follows then is a fresh assessment that suits the material.\u003c\/p\u003e\n\n\u003cp\u003eNote down the test spots, the fixing time and any colour zones that stood out, ready for the next wash day. That way the later decision starts with the history of the piece instead of from scratch again. On multi-coloured combinations especially, it stays traceable which trim gave colour up and where the light lining needs protecting most.\u003c\/p\u003e\n\n\u003cp\u003eSo the most important moment of a leather wash is not when you open the drum. It comes earlier, when a damp white cloth either stays clean or contradicts you in good time. Those 30 seconds preserve the character of the piece better than any later rescue of a discoloured lining.\u003c\/p\u003e","products":[{"product_id":"koch-chemie-colourlock-leather-fixative-farbfixierer","title":"COLOURLOCK \"Leather Fixative\" colour fixative that stops dye bleeding when you wash leather","description":"\u003ch2\u003eReliable colour fixing for washable leather with COLOURLOCK Leather Fixative\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eWhat is COLOURLOCK Leather Fixative for? — It locks down loose dyes in aniline, nubuck and pigmented leather, stops bleeding when you wash or clean, and keeps the colour where it belongs.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOURLOCK Leather Fixative\u003c\/strong\u003e is the pro answer when you want to keep dyes in leather firmly under control. On washable leather in particular – think car parts, bags, seat covers or fashion pieces – the fixative stops excess pigment from bleeding out when you wash or clean. The formula comes straight from COLOURLOCK's leather know-how: it locks down dyes that have started to move, stops unwanted migration and gives you an even, settled result – a must on delicate leathers like aniline, nubuck and semi-aniline automotive hides.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliably stops bleeding\u003c\/strong\u003e – the fixative technology binds loose dyes so they can't lift off in the wash or transfer onto nearby materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on any washable leather\u003c\/strong\u003e – great for cars, furniture, fashion and accessories; per Koch-Chemie it suits any leather where colour stability matters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSettles the surface\u003c\/strong\u003e – once treated, the leather sits more colour-stable, which makes later cleaning or care steps safer and more even.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eFixing technology \u0026amp; how it works on bleeding leather\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eLeather Fixative\u003c\/strong\u003e uses a dedicated fixing agent that latches onto loose dyes that aren't fully bound in. That matters most on open-pore or delicate leather, where the dyes don't sit as tight as they do in modern pigmented automotive hides. The binding matrix in the fixative locks those particles down so they don't lift the moment they meet water or a cleaner. Per Koch-Chemie, the formula guards above all against the wash-out you get with leather clothing, motorcycle gear or washable interior parts. At the same time the natural feel of the leather stays put, because the fixing happens inside the top layer and leaves no visible film.\u003c\/p\u003e\n\u003ch3\u003ePrep, how to use it \u0026amp; a wash-safe workflow\u003c\/h3\u003e\n\u003cp\u003eBefore you reach for \u003cstrong\u003eLeather Fixative\u003c\/strong\u003e, the leather should be free of heavy dirt. You use the fixative either as a pre-treatment ahead of a leather wash or as a stand-alone fix. Lay it down evenly across the surface, let it sit briefly, then work it in gently so the loose dyes get bound. After that comes the wash, or a gentle next step, depending on the job. The key is not to overdose – a thin, even film is plenty. On heavily bleeding leather it's worth a quick re-check on colour stability afterwards. Once it's fixed, the material is far easier to care for and clean later without bleeding all over again.\u003c\/p\u003e\n\u003ch3\u003eResults, where to use it \u0026amp; the payoff in detail\u003c\/h3\u003e\n\u003cp\u003eAfter use the colour holds much better, especially when wet. The leather sits calmer, more even and safer to keep working on. For car detailers, \u003cstrong\u003eLeather Fixative\u003c\/strong\u003e is ideal when colour-heavy interior parts might rub off during cleaning. In fashion it stops jackets, bags or shoes from running in the wash or in high humidity. Furniture and classic-car leather benefit too, since colour migration is a common headache there. The fixative is no substitute for a colour refresh or repair, though; all it does is lock down the pigment that's already there and stop it from moving.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about COLOURLOCK Leather Fixative\u003c\/h2\u003e\n\u003ch4\u003eWhich types of leather is the colour fixative suited to?\u003c\/h4\u003e\n\u003cp\u003ePretty much all of them: aniline, nubuck, pigmented leather plus washable fashion and upholstery leather. It's especially effective on bleeding or delicate surfaces.\u003c\/p\u003e\n\u003ch4\u003eDoes the fixative change the leather colour?\u003c\/h4\u003e\n\u003cp\u003eNo. It only locks down loose dyes – it doesn't change the shade or the surface of the leather.\u003c\/p\u003e\n\u003ch4\u003eCan I wash or clean as normal afterwards?\u003c\/h4\u003e\n\u003cp\u003eYes. The fixative is built to make washing or cleaning safer by stabilising the colour particles first.\u003c\/p\u003e\n\u003ch4\u003eDo I have to rinse the product off after fixing?\u003c\/h4\u003e\n\u003cp\u003eOnly if a leather wash follows. For a plain fix with no wash, letting it dry evenly is enough.\u003c\/p\u003e\n\u003ch4\u003eDoes the fixative also help against colour rubbing off onto clothing?\u003c\/h4\u003e\n\u003cp\u003eYes, it cuts the risk right down by holding the dye migration in check. On heavily bleeding leather a second pass can make sense.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 02.12.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × COLOURLOCK","offers":[{"title":"1000 ml \/ 1 liter","offer_id":56320223707471,"sku":"D1-KCX-484-1L-01","price":43.99,"currency_code":"EUR","in_stock":true},{"title":"100ml","offer_id":56320223740239,"sku":"D1-KCX-484-100ML-01","price":10.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/484-1L-01_1.png?v=1762117529"}],"url":"https:\/\/detailing1depot.com\/collections\/koch-chemie-colourlock-ratgeber-farbe-fixieren.oembed","provider":"Detailing1","version":"1.0","type":"link"}