{"title":"PROFILINE Plastic Care — SONAX","description":null,"products":[{"product_id":"sonax-profiline-gummipfleger-gummipflege-reifenpflege","title":"PROFILINE GummiPfleger rubber \u0026 tyre care","description":"\u003ch2\u003eProfessional rubber and tyre care in bulk — SONAX PROFILINE GummiPfleger\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does the SONAX PROFILINE GummiPfleger do? This professional rubber and tyre care product feeds and protects every rubber and tyre surface on the car, brings up a silky shine, stops fading and cracking — and comes in 5- and 60-litre containers built for non-stop pro use in car washes and detailing shops.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eRubber and tyre care is an often underrated part of professional car prep: tyres and rubber seals take the harshest conditions going — UV, temperature swings, chemical attack from brake dust, oils and cleaners. Without regular care rubber greys out, goes brittle and cracks — a process that leaves door seals leaking and tyres ageing way faster than they should. The \u003cstrong\u003eSONAX PROFILINE GummiPfleger\u003c\/strong\u003e is the professional care product for exactly this job: formulated specifically for rubber and tyres, sold in pro bulk containers and built for continuous use in car washes, detailing shops and fleet care.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFeeds and protects every rubber and tyre surface.\u003c\/strong\u003e The care formula works into the rubber structure, replaces the plasticisers that dry out over time and lays down a protective film that fends off UV, ozone and chemical load. Used regularly, rubber care keeps tyres and seals flexible, stops cracking and adds serious life. On cars with older tyres and weathered door rubbers the regeneration you see after the first pass is striking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDeep shine for tyres and black exterior rubber.\u003c\/strong\u003e The GummiPfleger gives tyres a rich, deep shine — your call between a matte natural-rubber look (go light) and a high-gloss wet look (lay it on heavier). Black exterior rubber (window seals, rear-spoiler rubber, bumper trim) blacks up evenly and comes back like new. That look is a big part of the finished, dialled-in impression of a freshly detailed car.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBulk for non-stop pro use — 5 and 60 litres.\u003c\/strong\u003e You can grab it in 5 litres for regular detailing shops or in the 60-litre container for car washes and fleet operations running very high volume. In bulk it pays off massively against single bottles — especially for car washes that offer tyre care as a fixed service module, the 60-litre container is the most economical way to go.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Lay the GummiPfleger down on clean, dry tyres — let the tyres dry off after the wash before you reach for the care product. Apply it with an applicator sponge or a soft cloth and work it in evenly. For a natural, matte shine go thin and let it soak in well — for a heavy wet look lay it on more generously and wipe back less. Whatever you do, keep all care product off the brake discs and pads. The GummiPfleger works on inner rubber seals too (door frames, boot lid) — here the care formula stops them freezing up in winter and sticking in high summer heat. As a partner product for black exterior plastic trim we'd point you at the \u003ca href=\"\/en\/products\/sonax-profiline-plastic-protectant-exterior-kunststoffpflege\"\u003eSONAX PROFILINE PlasticProtectant \"Exterior\"\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eRubber tech: how the GummiPfleger regenerates tyres and rubber parts\u003c\/h3\u003e\n\u003cp\u003eRubber is a composite of natural or synthetic polymer chains (elastomers) cross-linked by vulcanisation, with plasticisers giving it that characteristic flexibility. In service rubber parts steadily lose those plasticisers to UV, ozone, temperature swings and chemical attack — the rubber goes hard, grey and cracked. That process is irreversible once it's gone too far, but regular care slows it right down and in the early stages can even partly reverse it. On cars that sit in the sun a lot — no underground parking, or regular runs through sunny regions — that ageing speeds up sharply, which justifies a tighter rubber-care interval (every 4–6 weeks rather than quarterly).\u003c\/p\u003e\n\u003cp\u003eThe rubber care product carries active agents that work into the rubber structure and partly replace the spent plasticisers — the rubber gets more flexible, the colour comes back from faded grey to deep black, and a protective film shields the surface from further UV and ozone load. That mechanism makes rubber care a preventive and a restorative tool at the same time: used regularly it stops the breakdown; used on already-weathered rubber it slows further ageing and lifts the look a lot.\u003c\/p\u003e\n\u003cp\u003eTyres bring rubber care a particular challenge: tyre rubber holds not just elastomers but carbon black (for the black colour and UV protection), fillers and specific additives. Tyres greying out is often down to the built-in ozone protectant migrating out (wax fractions in the rubber that bleed out and form a white film) — that's normal and a sign the tyre's UV protection is doing its job. The GummiPfleger lifts that wax layer, blacks the surface and lays down a complementary protective film without touching the tyre's internal protection.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the GummiPfleger properly — workflow for tyres and rubber seals\u003c\/h3\u003e\n\u003cp\u003eThe best way to apply the rubber and tyre care depends on where it's going: tyres and exterior seals on one hand, inner seals on the other. For tyres the rule is: wash first (scrub the sidewalls thoroughly with a brush, pull off brake dust and grime layers), then dry, then apply the care product. Moisture on the tyre dilutes the care product and hurts how deep it penetrates — a dry tyre takes the GummiPfleger up far better.\u003c\/p\u003e\n\u003cp\u003eApplication method for tyres: with an applicator sponge or a soft cloth, lay the care product evenly onto the sidewall, using circular or sweeping strokes. Dwell time of 2–3 minutes, then wipe back the excess. Don't pull away onto a wet road with freshly dressed tyres — the care product can raise grip slip on the road at first, until it's fully dried in. In a service setting (e.g. a car wash) give it at least 2 minutes' dwell before the car leaves the line.\u003c\/p\u003e\n\u003cp\u003eFor rubber seals (door frames, boot-lid seals, window seals): work the care product on sparingly with a soft rag or cotton bud and rub it in well. For inner seals that suffer in winter (freezing, sticking), a treatment in autumn keeps the seals supple. Keep care product off any plastic or paint right next to the seals — mask carefully when you apply, or wipe it straight off after the treatment.\u003c\/p\u003e\n\u003cp\u003eIn automated car washes especially, dosing is everything: too much care product means slippery tyres and ugly run-off residue on the underbody — the recommended amount per tyre is 3–5 ml. With the right dosing system and foam applicators you control the amount precisely and get even coverage across the whole sidewall. Wash operators running the product in automated systems should check viscosity and pump-system compatibility up front — dialling it in to the specific line locks in even results on every car.\u003c\/p\u003e\n\n\u003ch3\u003eWhere it works: how the GummiPfleger is used in pro operations\u003c\/h3\u003e\n\u003cp\u003eThe bulk concept of the GummiPfleger is squarely aimed at non-stop professional use. In car washes tyre care is a high-appeal add-on service that drives customer satisfaction and extra revenue: a clean, deep-black tyre after the wash is, for many customers, the most visible quality marker of the whole job. With the 60-litre container and an automatic dosing system the GummiPfleger slots seamlessly into the car-wash workflow — economical and consistent across hundreds of cars a day.\u003c\/p\u003e\n\u003cp\u003eIn professional detailing shops rubber care is part of wrapping up every full detail — dressed tyres round off the look and tell the customer the car was handled head to toe. On top of that, rubber care on seals is a preventive service area: customers with regularly cared-for seals see fewer problems with a leaky car or doors jamming in winter — a service value that goes beyond pure cosmetics.\u003c\/p\u003e\n\u003cp\u003eFor fleet operations running large vehicle fleets the GummiPfleger in the 60-litre container is the most economical option for regular fleet care. Commercial vehicles, transport vehicles and company fleets often get cut back to a standard wash — with the GummiPfleger you lift the fleet's cared-for look noticeably with minimal effort. The \u003ca href=\"\/en\/products\/sonax-profiline-reifenglanz-wet-look-reifenpflege\"\u003eSONAX PROFILINE ReifenGlanz \"Wet Look\"\u003c\/a\u003e offers a sprayable tyre care alternative for quick one-off jobs without an applicator sponge.\u003c\/p\u003e\n\n\u003ch3\u003eGummiPfleger compared — how it differs from other tyre care products\u003c\/h3\u003e\n\u003cp\u003eTyre care splits into different product categories: tyre-shine sprays for quick one-off jobs, gel coatings for long-lasting tyre protection, and concentrated care products like the GummiPfleger for economical non-stop use. The key differences come down to application format, durability and cost per use. Spray products are easy to lay down but comparatively pricey per use and only come in small containers — ideal for the private customer, but not economical for a pro operation running lots of cars a day.\u003c\/p\u003e\n\u003cp\u003eThe GummiPfleger as a concentrated care product in bulk gives you the best cost per use and suits every application format — sponge, brush or diluted through dosing systems. Penetration is better with direct application onto dry rubber surfaces than with spray products that go onto wet tyres. For the best care effect and durability, sponging it onto a dry surface is clearly the way to go — the spray route is faster but less effective at getting into the rubber.\u003c\/p\u003e\n\u003cp\u003eAgainst products for exterior plastic parts (like the \u003ca href=\"\/en\/products\/sonax-profiline-plastic-protectant-exterior-kunststoffpflege\"\u003eSONAX PROFILINE PlasticProtectant \"Exterior\"\u003c\/a\u003e), the GummiPfleger is formulated specifically for the particular chemistry of rubber elastomers. Plastic and rubber may look alike but they're chemically different — a plastic care product can react differently than you'd expect on rubber. For the best results on tyres and rubber parts the dedicated rubber care product is the safe call, while the PlasticProtectant is the better answer for bumpers, trim strips and other thermoplastic exterior plastics.\u003c\/p\u003e\n\n\u003ch3\u003eBuy the SONAX PROFILINE GummiPfleger — container sizes and economics in pro use\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE GummiPfleger\u003c\/strong\u003e comes in two container sizes aimed at different pro needs. The 5-litre container is ideal for detailing shops that regularly work several cars a week and build tyre care in as a standard service — five litres, dosed sensibly, covers a great many full tyre treatments. The 60-litre container is built for car washes and fleet operations with daily high-volume use — here the bulk investment pays off through a much lower price per litre.\u003c\/p\u003e\n\u003cp\u003eThe cost-per-use comparison really brings home how economical the GummiPfleger is: at an average dose of 10–20 ml per car (four tyres + seals) the 5-litre container covers 250–500 full treatments. For a shop handling 10–20 cars a day, the 5-litre container is a month's supply — and the 60-litre container is then the logical next step for operations with higher throughput or for car washes running the GummiPfleger on automation.\u003c\/p\u003e\n\u003cp\u003eBottom line, the PROFILINE GummiPfleger is the right pro tool for anyone who wants to run tyre care and rubber preservation at scale with maximum economy. The formula delivers reliable results in both look and care effect — and thanks to the bulk container, cost control stays easy to budget even at high volume. Offer tyre care as a service module and you don't just lift the customer value of the detail, you stretch your customers' tyre life too — a double win for any professional operation.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"5 liters","offer_id":53623661232463,"sku":"D1-SNX-3405050","price":60.79,"currency_code":"EUR","in_stock":true},{"title":"60 liters","offer_id":53623661330767,"sku":"D1-SNX-3408000","price":788.97,"currency_code":"EUR","in_stock":false},{"title":"200 liters","offer_id":53623661363535,"sku":"D1-SNX-3409050","price":1993.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-gummipfleger-gummipflege-reifenpflege_5-liter.png?v=1731055849"},{"product_id":"sonax-profiline-plasticcare-kunststoffpflege","title":"PROFILINE PlasticCare Plastic Care","description":"\u003ch2\u003eRegenerate and Permanently Protect Plastic with SONAX PROFILINE PlasticCare\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE PlasticCare do? The solvent-free plastic care product refreshes faded colors, conceals dullness and superficial scratches, and preserves all plastic parts in the vehicle's interior and exterior — including engine compartment preservation directly after washing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eFaded plastic trims, dull dashboards, and grayed engine compartment covers are among the most common problems detailers face daily. What many don't know: Most silicone-based plastic care products may create short-term shine, but they attract dust, leave sticky surfaces, and offer no real protection. \u003cstrong\u003eSONAX PROFILINE PlasticCare\u003c\/strong\u003e takes a different approach — as a solvent-free, regenerating plastic care product, it refreshes colors, conceals dullness and scratches, and applies a protective preservation layer to the plastic without creating an obtrusive high-gloss look. The result is a subtle, natural shine that resembles a factory-new appearance and sells much better to customers than a greasy, shiny dashboard. Available in three container sizes — 1 liter, 5 liters, and 25 liters — PlasticCare meets the needs of small individual businesses to large detailing chains.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor refreshment with a subtle, natural shine.\u003c\/strong\u003e Black and dark gray plastic parts appear rich and vibrant after treatment, without an artificial gloss. The subtle shine typical of SONAX is created by a thin preservation layer that reflects light evenly, rather than mirroring it like a silicone layer. This is particularly crucial for high-end vehicles, where excessive shine on the dashboard can be perceived as cheap and irritates demanding customers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolvent-free — safe for all plastic types.\u003c\/strong\u003e The formula does not attack painted or unpainted plastics and is suitable for the entire vehicle interior. Unlike solvent-based alternatives, PlasticCare does not dry out the plastic or make it brittle. This is a crucial difference in the long run: While solvents remove superficial dirt, they also extract plasticizers from the material — the opposite of genuine, sustainable care.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine compartment preservation in one step.\u003c\/strong\u003e Sprayed directly after engine washing, PlasticCare preserves all plastic covers and cable insulation in the engine compartment. The surfaces are protected and given a well-maintained appearance that makes all the difference in vehicle inspections and used car sales. No separate engine compartment product is needed — PlasticCare handles this important task as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For optimal results, fill PlasticCare into a SONAX Sprayboy and dilute with water up to 1:2, depending on the desired gloss level. Less concentrate results in a duller, more natural look — ideal for dashboards and center consoles, where high gloss can cause glare. For the engine compartment, use PlasticCare undiluted, directly after engine washing and after blowing off excess water in recesses and on the ignition system with compressed air.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003ePlastic Care without Solvents — Why It Makes a Difference\u003c\/h3\u003e\n\n\u003cp\u003eThe market for plastic care products is confusing, and many products promise more than they deliver. Most inexpensive cockpit sprays and plastic care products rely on silicone oils and solvents as a base. The silicone oil provides immediate shine, and the solvent helps with quick absorption. The problem: Silicone oils form a film on the surface and attract dust like a magnet. After a few days, the treated dashboard looks dustier than before. Solvents, on the other hand, attack the plasticizers in the plastic in the long term — precisely the substances that keep the plastic supple and color-intensive.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSONAX PROFILINE PlasticCare\u003c\/strong\u003e works without solvents and instead uses a regenerating combination of active ingredients that penetrates the upper plastic layer, revives faded pigments, and forms a thin protective layer. This layer is not sticky, hardly attracts dust, and does not create an unnatural shine. The effect lasts significantly longer than with silicone products because the active ingredients do not simply remain on the surface and disappear with the next wipe, but actually regenerate the uppermost material layers.\u003c\/p\u003e\n\n\u003cp\u003eIn the daily practice of a detailing business, this difference is particularly evident in two areas: Firstly, the treated surface remains clean for significantly longer because no silicone film binds particles. Secondly, PlasticCare can be easily reworked — if the customer returns after weeks, a new application adheres perfectly without layers building up or residues needing to be removed. With silicone-based products, however, the old layer often has to be cleaned off before fresh care can be applied — a step that costs time and must be done with solvent-based cleaners, which in turn stress the plastic.\u003c\/p\u003e\n\n\u003cp\u003eAnother advantage of the solvent-free formula is evident in handling sensitive plastics: High-quality vehicles are increasingly using soft-coated surfaces in the interior — so-called soft-touch plastics, which feel pleasant but are extremely sensitive to solvents. Even a single contact with aggressive care products can lead to permanent sticky spots or abrasion of the soft-touch coating on these surfaces. PlasticCare is safe for these delicate surfaces and cares for them without attacking the coating — an aspect that is particularly relevant when detailing premium vehicles.\u003c\/p\u003e\n\n\u003ch3\u003ePlastic Refurbishment — Application in the Interior and on Exterior Parts\u003c\/h3\u003e\n\n\u003cp\u003eThe application of PlasticCare is deliberately kept simple to function quickly and efficiently in everyday business. For the interior, fill the product into a Sprayboy, spray it onto a \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-sensitivesurface-detailer-innenraumreiniger\"\u003esoft microfiber care pad\u003c\/a\u003e, and spread it evenly on the plastic. Do not spray directly onto the surface — first, this avoids overspray on windows and displays, and second, you have better control over the dosage. A thin, even application is sufficient; thicker layers do not produce a better result but only dry slower.\u003c\/p\u003e\n\n\u003cp\u003eDilution with water up to 1:2 is a practical feature that many products do not offer. For the dashboard and center console, we recommend the diluted version — the result is a subtle, silky sheen that does not cause glare in sunlight. Especially in vehicles with large, light dashboards, too much shine can reflect on the windshield and impair visibility. For door panels and plastic parts in the trunk, it can be used undiluted, as the glare effect plays no role here, and a more intensive color refreshing effect is desired.\u003c\/p\u003e\n\n\u003cp\u003eOn the exterior, PlasticCare demonstrates its strength on unpainted plastic parts: Bumper strips, mirror caps, wheel arch trims, and decorative strips that have turned gray due to UV radiation regain their dark color. The effect is not permanent — it diminishes after a few weeks outdoors and several washes — but for detailing before a sale or as a regular maintenance measure, it is convincing. Those seeking more durable protection on exterior plastics can use PlasticCare as a pre-treatment and then apply \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-ceramiccoating-cc-plastic-rubber-kunststoffversiegelung\"\u003eSONAX PROFILINE CeramicCoating CC Plastic+Rubber\u003c\/a\u003e as a long-term sealant.\u003c\/p\u003e\n\n\u003cp\u003eImportant during application: Do not work on hot surfaces. PlasticCare needs a moment to dry evenly — on heated plastic, the aqueous component evaporates too quickly, and uneven spots can occur. Ideally, work at room temperature or in the shade. The same applies to storage: Protect from frost, as the aqueous formula can be damaged at sub-zero temperatures. A frozen product can lose its uniform consistency and should no longer be used.\u003c\/p\u003e\n\n\u003cp\u003eFor a typical car interior, you will need about 20 to 30 milliliters of concentrate when diluted — meaning one liter of PlasticCare is sufficient for about thirty to forty complete interior treatments. For vehicles with particularly much plastic in the interior, such as SUVs or vans, expect double that amount. This efficiency is one of the reasons why PlasticCare is ultimately cheaper than cheap products despite the higher initial cost.\u003c\/p\u003e\n\n\u003ch3\u003eEngine Compartment Preservation — The Underestimated Area of Application\u003c\/h3\u003e\n\n\u003cp\u003eEngine compartment preservation is an area that many detailers neglect or cover with specialized products. PlasticCare offers a practical advantage here: It handles this task as well, without you needing an additional product. The optimal time is directly after engine washing — the engine compartment is clean, the surfaces are still slightly damp, and PlasticCare can be spread particularly evenly and quickly on the damp surfaces because the water acts as a lubricant.\u003c\/p\u003e\n\n\u003cp\u003eThe process: First, blow off excess water in recesses, at plug connections, and on the ignition system with compressed air. Then, spray PlasticCare undiluted with the Sprayboy evenly onto the plastic covers. The preservation protects against renewed soiling, prevents roughening and graying due to heat, oil vapors, and environmental influences, and gives the engine compartment a clean, consistently well-maintained appearance. During vehicle valuation — whether used car sales, lease returns, or vehicle inspections — a well-maintained engine compartment makes a measurable difference in the overall impression.\u003c\/p\u003e\n\n\u003cp\u003eA practical note: PlasticCare is also excellent for camping vehicles and commercial vehicles, where the engine compartment is often exposed to more severe dirt than in cars. The solvent-free formula is harmless to rubber seals and cable insulation in the engine compartment — both materials that can be attacked by solvent-based preservatives. For electric and hybrid vehicles, the gentle formula is also a plus, as sensitive high-voltage cable sheaths and electronic connectors are not stressed by aggressive chemicals. A clean, preserved engine compartment signals during the main inspection and every workshop visit that the vehicle is carefully maintained — a detail that experienced inspectors and buyers immediately notice.\u003c\/p\u003e\n\n\u003ch3\u003ePlastic Care Comparison — PlasticCare vs. XTREME Plastic Sealant vs. Cockpit Spray\u003c\/h3\u003e\n\n\u003cp\u003eIn addition to PROFILINE PlasticCare, the SONAX range also includes the \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-xtreme-ceramic-kunststoff-versiegelung\"\u003eXTREME Ceramic Plastic Sealant\u003c\/a\u003e. The difference: The XTREME variant is positioned as a consumer product and offers a ceramic sealing component that primarily aims for protection. PROFILINE PlasticCare, on the other hand, is the choice for professional use because it can be diluted, is available in large containers (1 l, 5 l, 25 l), and covers engine compartment preservation in addition to care. For daily operational use with dozens of vehicles per week, PlasticCare is the more economical and versatile solution.\u003c\/p\u003e\n\n\u003cp\u003eClassic cockpit sprays from hardware stores are no serious comparison. They are almost exclusively based on silicone oil, create an artificial high gloss that is undesirable in professional detailing, and offer no real care or regeneration. They do not belong on a vehicle in a detailing business — they leave residues that interfere with later ceramic sealing and must be laboriously removed. PlasticCare, on the other hand, is compatible with all common sealing systems and does not form problematic silicone layers. This is a crucial point for businesses that offer ceramic coatings in addition to detailing: With PlasticCare, you care for the plastic without creating problems for later coating work.\u003c\/p\u003e\n\n\u003cp\u003eFor detailers seeking a complete care system, the combination of PlasticCare for plastic, \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-gummipfleger-gummipflege-reifenpflege\"\u003eSONAX PROFILINE RubberCare\u003c\/a\u003e for rubber and tires, and \u003ca href=\"https:\/\/detailing1.de\/products\/sonax-profiline-leatherprotection-lederpflege\"\u003eSONAX PROFILINE LeatherProtection\u003c\/a\u003e for leather provides comprehensive coverage of all interior materials. Each product specializes in its material and delivers better results than a universal interior product that can do \"a little bit\" of everything. Those who shy away from building such a material-specific system can start with PlasticCare alone to achieve a significant quality leap compared to universal products — the other specialized products can then be added step by step as needed and as customers appreciate the difference.\u003c\/p\u003e\n\n\u003ch3\u003eWho Benefits from SONAX PROFILINE PlasticCare?\u003c\/h3\u003e\n\n\u003cp\u003eSONAX PROFILINE PlasticCare is aimed at detailing businesses, car dealerships, and workshops that care for vehicle interiors and engine compartments daily. The 5-liter container is the most economical option for businesses with high throughput — and the 25-liter canister is even cheaper for large businesses or detailing chains. The ability to dilute with water makes PlasticCare one of the most efficient plastic care products on the market: One liter yields three liters of ready-to-use solution when diluted 1:2.\u003c\/p\u003e\n\n\u003cp\u003eFor used car detailers, PlasticCare is particularly valuable because it quickly and visibly regenerates faded plastics — exactly what customers notice at first glance into the interior. A freshly treated dashboard with a natural shine conveys the impression of a well-maintained vehicle, and experience shows that this noticeably increases the achievable selling price. In combination with thorough interior cleaning — for example, with SONAX PROFILINE MultiStar as a pre-cleaner — PlasticCare provides the optical finish that makes the difference between \"clean\" and \"detailed.\"\u003c\/p\u003e\n\n\u003cp\u003eAn honest note: PlasticCare is a care and preservation product, not a permanent sealant. On highly UV-exposed exterior plastics, the effect diminishes after a few weeks and must be renewed. Those looking for a long-term solution for exterior plastics should use PlasticCare as a care base and then apply a ceramic sealant over it. In the interior, where UV exposure is lower, the effect lasts significantly longer. For its intended use — professional plastic care in everyday detailing — SONAX PROFILINE PlasticCare is one of the most convincing solutions on the market: efficient, versatile, and with results that speak for themselves. Whether interior, engine compartment, or exterior plastics — PlasticCare is the product that should not be missing from any professional detailing equipment. Once you have used it in daily operations, you will quickly realize that cockpit sprays and cheap plastic care products are a thing of the past — not because it is more expensive, but because it simply works better and is even cheaper in the long run. The crucial difference is evident not only in the immediate result but above all in its durability and compatibility with subsequent care steps and sealants.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57344841843023,"sku":"D1-SNX-2054050","price":16.65,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":57344841875791,"sku":"D1-SNX-2055000","price":69.9,"currency_code":"EUR","in_stock":true},{"title":"25 liters","offer_id":57344841908559,"sku":"D1-SNX-2057050","price":207.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-plasticcare_1000ml.png?v=1774741150"},{"product_id":"sonax-profiline-plastic-protectant-exterior-kunststoffpflege","title":"PROFILINE PlasticProtectant \"Exterior\" Plastic Care","description":"\u003ch2\u003eRestore Weathered Plastics and Protect Them Permanently — SONAX PROFILINE PlasticProtectant \"Exterior\"\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat can a deep plastic treatment do that normal plastic care products cannot? The silicone-free professional deep treatment from the PROFILINE range penetrates deep into porous exterior plastics, revitalizes faded black, and offers protection that withstands several shampoo washes.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eUnpainted exterior plastics are one of the most common visual weaknesses on a vehicle: bumpers, sill panels, fender flares, and exterior mirror housings fade over time from rich black to dull grey — an unmistakable sign of UV damage and lack of care. Many care products only coat the surface superficially and are washed off again with the next rain or wash. The \u003cstrong\u003eSONAX PROFILINE PlasticProtectant \"Exterior\"\u003c\/strong\u003e goes deeper: the silicone-free gel formula penetrates the pores of the plastic, nourishes the material from within, and permanently restores the original color depth — with durability that lasts through several washes.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDeep action instead of surface coating.\u003c\/strong\u003e The gel formula is designed to penetrate the microporous structure of exterior plastics. Normal plastic has a porous surface that loses plasticizers over time — the result is fading and a grey, dull look. The PlasticProtectant penetrates these pores and supplies the material with active care ingredients that perform a plasticizer-like function and regenerate the surface from within. Surface coatings would not achieve this deep action and would be wiped away at the first contact.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLong-lasting protection that holds through several washes.\u003c\/strong\u003e A common criticism of plastic care products is their short durability — after the first rain or shampoo wash, the effect is gone. The PROFILINE PlasticProtectant is designed for continuous professional use: the formula withstands several high-pressure cleaner passes and shampoo washes. For detailing businesses, this means that plastic care does not have to be repeated every time the vehicle visits — a clear efficiency advantage compared to less durable products.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSilicone-free formula — safe for painted areas, rubber, and wraps.\u003c\/strong\u003e Silicone in plastic care products is a known problem in detailing businesses: it oversprays onto paint, makes surfaces unsuitable for new paint jobs and wraps, and leaves residues on window frames that interfere with subsequent glass sealants. The PlasticProtectant \"Exterior\" contains no silicone — it can therefore be used safely close to painted surfaces and rubber seals, without residues interfering with further detailing workflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For optimal results, clean the plastic of dirt, old care product residues, and silicone residues from previous products using a plastic cleaner or a mild all-purpose cleaner before application. Old residues on the surface prevent the PlasticProtectant from penetrating deeply — the effect is then significantly less than on a cleaned surface. Distribute the product thinly on an application sponge or a soft cloth and work it into the surface. Less is more: a thin film is more effective than a thick layer that dries on the surface and becomes streaky. Before application, bring the plastic to room temperature — on ice-cold plastic, the gel penetrates more slowly and is more likely to leave a surface film than a deep effect.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSilicone-free Deep Plastic Treatment — How Plastic Protectant Revitalizes Weathered Exterior Plastic\u003c\/h3\u003e\n\n\u003cp\u003eThe PROFILINE range from SONAX stands for formulas with higher active ingredient concentrations than the consumer line — for the PlasticProtectant \"Exterior\", this means a higher proportion of the active care ingredients responsible for the deep action. These active ingredients are low-molecular, i.e., small enough to penetrate the microporous structure of hard plastic. Standard plastic care products often rely on silicones because they dry quickly and provide immediate high gloss — but silicone does not penetrate the plastic, it only sits on top. The PlasticProtectant, however, works with polar care oils and polymers that are chemically akin to the polypropylene and polyamide plastics that dominate automotive construction.\u003c\/p\u003e\n\n\u003cp\u003eThe UV protection components in the \u003cstrong\u003eSONAX PROFILINE PlasticProtectant \"Exterior\"\u003c\/strong\u003e are crucial for long-term care. UV radiation is the main cause of plastic fading: it breaks down the molecular chains on the surface, oxidizes the surface, and drives out the plasticizers that give the plastic its color and elasticity. UV stabilizers in the formula absorb or reflect UV radiation before it can damage the plastic. Regular application of the PlasticProtectant continuously builds up this UV protective film and maintains the original color depth more permanently than without protection.\u003c\/p\u003e\n\n\u003cp\u003eFor severely weathered plastics that are already noticeably grey and brittle, a two-part treatment is recommended: first, plastic restoration with an abrasive deep care product that can mechanically remove the oxidized layer; then the PlasticProtectant as a long-term protective finish. The PlasticProtectant alone can visually improve very severely weathered plastic, but cannot fully restore it to a new condition if the damage has penetrated deep into the material. As a care product for well-maintained or moderately weathered plastic, however, it is optimal.\u003c\/p\u003e\n\n\u003cp\u003eThe mode of action differs slightly on various plastic types: Polypropylene (PP), the most common exterior plastic for bumpers and sills, is relatively non-polar and readily absorbs the care formulas. Polycarbonate (PC) in headlight housings and some mirror trims is somewhat smoother and less porous — here, a second application after the first penetration can be useful to enhance the deep action. ABS plastics in trim strips and exterior trims have a finer surface structure and absorb the PlasticProtectant more slowly due to lower porosity — here, a longer exposure time (10–15 minutes instead of 5) is optimal before removing excess product. The product is compatible with all common automotive plastics; however, a quick visual test on a small area before full treatment is still recommended for older or unknown plastics.\u003c\/p\u003e\n\n\u003cp\u003eIts suitability for rubber parts is an additional benefit: rubber on window seals, door frames, and bumper edges also loses plasticizers due to UV and ozone exposure and becomes brittle over time. The PlasticProtectant can be applied to these rubber parts and provides them with the same care components as the plastic. This simplifies the care workflow: one product for unpainted exterior plastic and adjacent rubber parts, without having to switch between products.\u003c\/p\u003e\n\n\u003ch3\u003eApplying Plastic Protectant Exterior — Application, Thin Layer, and Common Mistakes\u003c\/h3\u003e\n\n\u003cp\u003eThe correct application of PlasticProtectant begins with preparing the plastic: completely cleaned, dry, and brought to approximately room temperature. Apply a small drop of the gel product to a closed foam applicator or a microfiber cloth and work it evenly into the plastic surface with small circular movements. The gel's consistency allows for controlled dosing — it does not run, does not form drops, and stays where it is applied.\u003c\/p\u003e\n\n\u003cp\u003eThe most common mistake during application: too much product at once. A thick film on the plastic initially looks intensely glossy, but dries unevenly and leaves streaky, whitish areas after drying. The optimal amount is far less than expected — the product should penetrate, not sit on the surface. A second, thin application after the first has penetrated is more effective than a single thick application. After application, allow 5–10 minutes for it to work, then use a dry, clean microfiber cloth to remove any excess product and simultaneously distribute the shine evenly.\u003c\/p\u003e\n\n\u003cp\u003eFor bumpers with deep structures and honeycomb patterns, a fine detailing brush is recommended to work the gel into the recesses. Structured exterior plastics have more surface area than flat parts and accordingly require slightly more product — but still apply thinly so that no residues dry in the recesses. A common problem with bumper honeycombs is the drying of care product in the corners, which becomes visible as white residue after drying. Thanks to its clear, gel-like formula, PlasticProtectant has less tendency to leave white residues than silicone-based products — but it can still occur with excessive application. Apply thinly and work out any excess is the solution.\u003c\/p\u003e\n\n\u003ch3\u003eUV Protection and Durability — How Many Washes the Protection Endures\u003c\/h3\u003e\n\n\u003cp\u003eThe durability of PlasticProtectant \"Exterior\" depends on several factors: frequency of car washes, water temperature during washing, mechanical contact in the car wash, and sun\/UV exposure of the vehicle. Under normal conditions — monthly washing, moderate sun exposure — the built-up protection lasts 4–8 weeks at a level significantly above untreated plastic. With weekly washing or intensive high-pressure contact, durability shortens accordingly, but remains longer than with superficial competitor products.\u003c\/p\u003e\n\n\u003cp\u003eFor professional detailing businesses, the long-lasting effect means that plastic care does not always have to be repeated for vehicles accepted for several weeks. A vehicle brought for full detailing, whose plastics are treated with PlasticProtectant, remains in optimal condition for 4-6 weeks with normal use by the vehicle owner. This reduces complaints due to quickly fading plastics and saves time in the detailing business.\u003c\/p\u003e\n\n\u003cp\u003eAn important practical aspect: the first application on severely weathered plastic often does not yet show the full result. The weathered, porous plastic quickly absorbs the first PlasticProtectant application and fills the deepest pores; the shine and color depth improve significantly, but not to the maximum. A second application after the first has fully penetrated (and a third in the case of very severe weathering) brings the deep effect to its optimum. This build-up approach — multiple thin layers instead of one thick one — is more efficient and delivers a more even, deeper result than a single intensive application.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicles that are heavily exposed to the sun — e.g., in countries with intense sunlight or during summer parking outdoors — a monthly refresher is recommended. The UV protection components are used up faster by strong sun exposure as they absorb the UV energy that would otherwise damage the plastic. A quick refresher only takes a few minutes per vehicle and permanently protects the plastics from the greyish aging effect.\u003c\/p\u003e\n\n\u003ch3\u003ePlasticProtectant \"Exterior\" in Comparison — vs. PlasticCare and vs. PlasticGel\u003c\/h3\u003e\n\n\u003cp\u003eWithin the SONAX plastic care range, there are clear positional differences. The \u003ca href=\"\/en\/products\/sonax-profiline-plasticcare-kunststoffpflege\"\u003eSONAX PROFILINE PlasticCare\u003c\/a\u003e is also a PROFILINE product, but designed for broader application on painted and unpainted plastics — it is more universal, but not as specialized for deep action on heavily weathered exterior plastics. For vehicles with mixed plastic surfaces (interior + exterior, painted + unpainted), PlasticCare offers a practical single-product solution; for exclusively unpainted exterior plastics, the PlasticProtectant \"Exterior\" is the more focused choice with stronger deep action.\u003c\/p\u003e\n\n\u003cp\u003eA comparative aspect that is often underestimated in practice: the effect on matte plastics. Some modern vehicles have matte or satin-finished exterior plastics as standard (for example, matte spoilers or exterior mirror housings). On these surfaces, a glossy plastic care product would destroy the desired matte effect and create glossy spots. When applied thinly, the PROFILINE PlasticProtectant has a subtle, unobtrusive gloss level — with very thin application and thorough working in, it can also be used on matte plastics without completely destroying the matte look. For explicitly matte surfaces, however, a product specifically developed for matte surfaces is recommended, which is guaranteed not to produce a high-gloss effect. For normal, slightly glossy exterior plastics, the PlasticProtectant is the standard choice in the PROFILINE range.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-xtreme-kunststoffgel-aussen-kunststoffpflege\"\u003eSONAX XTREME PlasticGel \"Exterior\"\u003c\/a\u003e is the consumer version for the same application area: unpainted exterior plastics. It has similar application properties to the PROFILINE PlasticProtectant but a lower concentration of active ingredients — ideal for occasional users who care for their vehicle once or twice a year. The PROFILINE product is designed for continuous professional use and delivers more active ingredient density per application — this pays off significantly more on severely weathered surfaces and in businesses that treat many vehicles daily than the consumer version.\u003c\/p\u003e\n\n\u003cp\u003eFor rubber care near window seals and door frames, the \u003ca href=\"\/en\/products\/sonax-profiline-gummipfleger-gummipflege-reifenpflege\"\u003eSONAX PROFILINE RubberCare\u003c\/a\u003e is the complementary choice: it is specially formulated for the elasticity regeneration of rubber and contains different active ingredients than the PlasticProtectant. For exterior sill rubbers and window frames, a combination is recommended: PlasticProtectant for the plastic surfaces, RubberCare for the adjacent rubber seals.\u003c\/p\u003e\n\n\u003ch3\u003eBuying Plastic Care — For Whom the SONAX PROFILINE PlasticProtectant \"Exterior\" is the Right Choice\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE PlasticProtectant \"Exterior\"\u003c\/strong\u003e is the first choice for professional detailing businesses that treat exterior plastics daily and require a long-lasting, silicone-free solution. One liter of product, with thin application, is sufficient for many vehicle sets — the container size is geared towards continuous professional use. For private users with one or two vehicles who want to keep their plastic in top optical condition permanently, the 1-liter bottle is also economically viable in the long term: with thin application, the consumption per vehicle is low.\u003c\/p\u003e\n\n\u003cp\u003eThe PlasticProtectant is particularly relevant for vehicle owners with vehicles older than 5 years, as exterior plastics typically lose significant color depth after this time without care — even if the vehicle is washed regularly. Vehicles whose exterior plastic is already noticeably faded — grey spoilers, dull bumpers, bleached sill panels — are particularly affected. A single intensive treatment immediately shows the difference; regular care afterwards permanently maintains the regenerated condition. As a verified SONAX specialist dealer, Detailing1 permanently carries the PROFILINE PlasticProtectant \"Exterior\" in its range in the 1-liter container size for continuous professional use. The product is ready to use immediately — no dilution, no preparation, directly from the bottle to the applicator and get started.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57345086325071,"sku":"D1-SNX-2103000","price":21.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-plastic-protectant-exterior_1liter.png?v=1774731882"}],"url":"https:\/\/detailing1depot.com\/en\/collections\/profiline-kunststoffpflege.oembed","provider":"Detailing1","version":"1.0","type":"link"}