{"title":"PROFILINE Wet Sealant — SONAX","description":null,"products":[{"product_id":"sonax-profiline-spray-seal-nassversiegelung","title":"PROFILINE Spray+Seal Wet Sealant","description":"\u003ch2\u003ePROFILINE Spray+Seal: The Intelligent Wet Sealant for Your Weekly Car Wash\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003e\"The simplest and fastest wet sealant: Spray, Rinse, Sealed – within 5 minutes during regular washing.\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003cp\u003eYou wash your car every week or two. And every time you ask yourself: \u003cstrong\u003eHow do I easily maintain my paint protection?\u003c\/strong\u003e This is where \u003cstrong\u003ePROFILINE Spray+Seal\u003c\/strong\u003e from SONAX comes in – a wet sealant that frees you from this dilemma because it is \u003cstrong\u003eapplied directly during the car wash\u003c\/strong\u003e. No more complicated sealing rituals, no extra hours in the garage – just intelligent paint care that integrates into your existing routine.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e3 biggest advantages\u003c\/strong\u003e of PROFILINE Spray+Seal at a glance:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime savings in detail:\u003c\/strong\u003e 5 minutes to seal your car during washing – no separate step required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant hydrophobicity:\u003c\/strong\u003e Water immediately beads off, dirt adheres less, water spots leave no stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe paint care for long-sealed surfaces:\u003c\/strong\u003e Specially developed for vehicles with long-term sealants – ideal for refreshing and maintaining.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003ePractical tip:\u003c\/strong\u003e Use PROFILINE Spray+Seal when rinsing your car. Spray it onto the still-wet paint, wait 30–60 seconds, then rinse with clear water – done! The effort is minimal, but the effect is immediately visible: The paint appears deeper, shinier, and remains hydrophobic.\u003c\/p\u003e\n\n\u003ch3\u003e1. What is a wet sealant and why do you need it?\u003c\/h3\u003e\n\n\u003cp\u003eA \u003cstrong\u003ewet sealant\u003c\/strong\u003e is a quick protective layer that you apply directly to your damp or wet paint – usually during washing, often without additional drying time. Unlike traditional hard waxes or full ceramic coatings, which need hours or days to cure, a wet sealant works immediately.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003edifference is crucial:\u003c\/strong\u003e You invest only a few extra seconds with each car wash and get a visible protective and gloss effect. This makes PROFILINE Spray+Seal the ideal \u003cstrong\u003emaintenance sealant\u003c\/strong\u003e if your car is already equipped with a base sealant or if you simply want an uncomplicated solution that fits into your washing routine.\u003c\/p\u003e\n\n\u003cp\u003eMost detailers and car owners use wet sealants for three reasons:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic effect:\u003c\/strong\u003e Water beads off instead of standing – this drastically reduces water spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface gloss:\u003c\/strong\u003e The paint appears fresher, deeper, and mirror-like – ideal for color refreshment between more elaborate sealants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirt repellent:\u003c\/strong\u003e Dirt (insects, bird droppings, industrial fallout) adheres less firmly to the surface and is easier to remove.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e2. PROFILINE Spray+Seal in Detail: Composition and Properties\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eSONAX PROFILINE Spray+Seal\u003c\/strong\u003e is the wet sealant from the professional PROFILINE series – not the standard range, but the solution for demanding detailers and dedicated car owners. The formula is based on modern polymers and is specially optimized for application during car washing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe most important features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication during washing:\u003c\/strong\u003e Sprayable on wet paint, then rinse – sealed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use:\u003c\/strong\u003e No dilution, no preparation necessary – open, spray, rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy application:\u003c\/strong\u003e Even beginners can apply PROFILINE Spray+Seal flawlessly; the formula forgives minor imperfections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydrophobic effect:\u003c\/strong\u003e Water visibly beads off, water droplets roll off the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface improvement:\u003c\/strong\u003e The paint appears deeper and shinier after application – not dull or sticky.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Germany:\u003c\/strong\u003e Developed and manufactured according to strict SONAX quality standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSize and yield:\u003c\/strong\u003e The 5-liter canister is sufficient for numerous washes. Depending on the vehicle size and spray method, you will need approximately 10–50 ml per wash, which offers an excellent cost-benefit ratio. A canister therefore lasts for small and medium vehicles for 50–100+ applications.\u003c\/p\u003e\n\n\u003ch3\u003e3. Practical Application: Step by Step\u003c\/h3\u003e\n\n\u003cp\u003eThe application of PROFILINE Spray+Seal is deliberately simple. Here is the proven procedure:\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e Your vehicle is washed and still wet. You fill PROFILINE Spray+Seal into a spray container (e.g., SONAX Spray Boy or a comparable pressure sprayer).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e You spray the sealant in fine, even streaks onto the still-damp paint. No perfect coverage is necessary – a loose layer is sufficient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDwell time:\u003c\/strong\u003e 30–60 seconds waiting time for the formula to react with the paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse:\u003c\/strong\u003e You thoroughly rinse the vehicle with clear water (preferably with a pressure washer or garden hose).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying:\u003c\/strong\u003e Optionally, a light wiping with a lint-free microfiber cloth – but even without drying, the wet sealant does its job.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003ePro tips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways spray PROFILINE Spray+Seal \u003cstrong\u003eonto wet paint\u003c\/strong\u003e – the product is designed for this.\u003c\/li\u003e\n\u003cli\u003eUse a \u003cstrong\u003efine spray pattern\u003c\/strong\u003e for even coverage; coarse dripping wastes material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not apply too thickly\u003c\/strong\u003e – a thin, even layer is completely sufficient. Thicker applications do not provide additional benefits.\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003ehydrophobicity is visible immediately after rinsing\u003c\/strong\u003e – you will instantly see water beading off the surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e4. Durability and Long-term Effect: Realistic Expectations\u003c\/h3\u003e\n\n\u003cp\u003eA frequently asked question is: \u003cstrong\u003e\"How long does PROFILINE Spray+Seal last?\"\u003c\/strong\u003e The honest answer: \u003cstrong\u003eThat depends on your washing habits and external conditions.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eRealistic guidelines from practice and tests show:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater protection (hydrophobicity):\u003c\/strong\u003e 2–4 weeks with a visible water beading effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface gloss:\u003c\/strong\u003e Visually clearly perceptible for 3–6 weeks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirt repellent:\u003c\/strong\u003e 2–8 weeks, depending on environmental exposure (heavy rain, industrial area, frequent driving wear out faster).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe advantage: \u003cstrong\u003eYou don't have to wait months for the next application.\u003c\/strong\u003e Because PROFILINE Spray+Seal is used with every car wash anyway, you regularly distribute the protection. This creates a continuous, stackable effect – your paint always remains protected and shiny, without you investing extra time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Durability is not to be understood like a 12-month ceramic coating, which is a mechanical barrier. PROFILINE Spray+Seal is a caring and protective layer that renews itself every week. That is the concept – and it works.\u003c\/p\u003e\n\n\u003ch3\u003e5. PROFILINE Spray+Seal in Context: When is it the Right Choice?\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003ePROFILINE Spray+Seal is perfect for you if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou wash your car \u003cstrong\u003eregularly (weekly to bi-weekly)\u003c\/strong\u003e – not just once a year.\u003c\/li\u003e\n\u003cli\u003eYou want an \u003cstrong\u003euncomplicated solution\u003c\/strong\u003e that can be applied without special knowledge.\u003c\/li\u003e\n\u003cli\u003eYour vehicle is already equipped with a \u003cstrong\u003ebase sealant\u003c\/strong\u003e (e.g., factory sealant, a previous ceramic coating) and you only want to refresh it.\u003c\/li\u003e\n\u003cli\u003eYou want to \u003cstrong\u003einvest a maximum of 5 minutes per wash\u003c\/strong\u003e for visual protection and shine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater droplets and water spots\u003c\/strong\u003e are your main problem – PROFILINE Spray+Seal solves exactly that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePROFILINE Spray+Seal is NOT the first choice if:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou need an \u003cstrong\u003eextremely durable protection for 6–12 months\u003c\/strong\u003e (then a professional ceramic coating is better).\u003c\/li\u003e\n\u003cli\u003eYour car is still \u003cstrong\u003ewithout any sealant\u003c\/strong\u003e and you need a \u003cstrong\u003ecomplete initial sealant\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eYou wash your vehicle \u003cstrong\u003eonly a few times a year\u003c\/strong\u003e – then a long-term sealant is more efficient.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIn summary: \u003cstrong\u003ePROFILINE Spray+Seal is the weapon of choice for detailers and car owners looking for a simple, effective maintenance sealant that integrates seamlessly into regular car washing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"margin-top: 30px; padding-top: 20px; border-top: 2px solid #3498db;\"\u003e\u003cstrong\u003eConclusion:\u003c\/strong\u003e With \u003cstrong\u003ePROFILINE Spray+Seal from SONAX\u003c\/strong\u003e, you transform your car wash into a complete care program. You don't need special accessories, special knowledge, or hours in the garage. Just a ready-to-use solution that protects your paint, makes it hydrophobic, and brings it to a shine in 5 minutes. That's intelligent paint care.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"5 liters","offer_id":57345100480847,"sku":"D1-SNX-2435000","price":65.43,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-spray-seal_5l.png?v=1774731903"},{"product_id":"sonax-profiline-hypercoat-nassversiegelung","title":"PROFILINE HyperCoat wet sealant","description":"\u003c!-- BLOCK 1: body_html --\u003e\n\u003ch2\u003ePaint protection straight out of the wash — SONAX PROFILINE HyperCoat wet sealant\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE HyperCoat do? This pro-grade wet sealant goes on the car while it's still wet and rinses off with water — laying down a thin, hydrophobic protective layer on the paint that builds gloss and beading after every wash.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn a professional valeting business, it's never just about how clean you get the car — it's about efficiency too: every extra step costs time and resources. The \u003cstrong\u003eSONAX PROFILINE HyperCoat\u003c\/strong\u003e answers the question of how to fold paint protection and gloss into the regular wash, without a separate drying, degreasing and sealing step. Being a wet sealant, HyperCoat is sprayed straight onto the wet car after the wash, left to dwell for a moment, then rinsed off with clean water. What's left behind is an even, hydrophobic film on the paint that boosts gloss, makes water bead and builds light protection against dirt grabbing hold.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart of the wash — sealing with no extra step.\u003c\/strong\u003e The key edge of a wet sealant over traditional dry waxes and polymer sealants is in how you use it: on the wet car — after the foam wash and rinse — you spray HyperCoat on, and the final rinse spreads it and flushes off the excess at the same time. There's no full drying step before sealing. That trims the total time of a detail with a sealing component right down.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBeading and gloss after every wash.\u003c\/strong\u003e The HyperCoat formula carries polymers and hydrophobic actives that settle into an even film on the paint as you rinse. That film gives you the hydrophobic lotus effect: water beads off the paint in droplets after the treatment, carrying dirt particles with it and leaving barely any water spots. At the same time the polymers lift surface reflection and crank up the gloss — the car looks brighter after the wet sealant than after a plain wash with no care add-on.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA care cycle you run after every wash.\u003c\/strong\u003e HyperCoat is built for repeat use at every car wash — the protective film you build up is partly worn away by washing, and going on again after the wash renews it. That care cycle keeps the paint protected and glossy for the long haul, with no need for separate, fiddly sealing sessions. Ideal for wash bays and detailing shops that want to hand their customers an extra bit of care value after every wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e HyperCoat gives you its best result on fully cleaned paint — leftover grime, limescale and tar spots on the surface cut into how evenly the sealing polymers spread and grab. So wash thoroughly first, then spray HyperCoat on. When you work the wet car: go panel by panel, let it dwell briefly (30–60 seconds), then rinse off evenly — no rubbing, the polymers settle on their own. HyperCoat works on glass, wheels and plastics too, though on glass a separate glass cleaner is the better call for maximum streak-free finish. For cars with an existing ceramic coating: HyperCoat tops up the lotus effect in the short term, plays nicely with ceramic systems and works as a topper product after every wash. For the \u003ca href=\"\/en\/products\/sonax-profiline-spray-seal-nassversiegelung\"\u003eSONAX PROFILINE Spray+Seal\u003c\/a\u003e as a spray wet sealant for large-surface jobs, the 5-litre drum is the way to go.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWet sealant tech — how polymers grab onto wet paint\u003c\/h3\u003e\n\u003cp\u003eThe way the \u003cstrong\u003eSONAX PROFILINE HyperCoat\u003c\/strong\u003e works is surprising at first glance: how can a sealant grab onto wet paint covered in water? The answer is in the special make-up of the polymer emulsion: the active polymers in HyperCoat are suspended in a water-based emulsion and built to interact preferentially with the paint surface, even when a water film is sitting on it. The polymer molecules are lined up so their hydrophobic ends point at the paint and bond, while their hydrophilic ends point outward and stay in the water film.\u003c\/p\u003e\n\u003cp\u003eOn the final rinse, surplus polymer layers and the carrier water flush away — what stays on the surface is a single-molecule to a few-nanometre-thin polymer layer that holds firm on the paint. That layer is thinner and less durable than a dry-applied polymer sealant or a ceramic coating, but for regular repeat use it's a cost- and time-efficient alternative. Pairing regular wet sealing (after every wash) can deliver a care result over the long run that's just as good as rarer, more involved dry sealants — through build-up and constant renewal.\u003c\/p\u003e\n\u003cp\u003eThe hydrophobic effect of the HyperCoat polymers typically holds for several weeks before it's worth going on again. That depends on the conditions: frequent washing, heavy UV exposure and mechanical stress (driving in rain, automatic car washes) wear the polymer layer down faster than light use and sheltered parking. Day-to-day, the move that's proven itself is running HyperCoat with every exterior wash — a regular interval that keeps the protection working all the time, with no need to plan in separate sealing sessions.\u003c\/p\u003e\n\n\u003ch3\u003eUsing HyperCoat right — folding it into a pro wash process\u003c\/h3\u003e\n\u003cp\u003eYou always use the wet sealant after the car is fully clean and before the final rinse. Step 1 — wash the car: finish the regular wash (pre-foam, hand wash or machine cycle) all the way through. After the wash the car should still be wet, but with no real dirt load left on the surface — loose dirt particles would get trapped in when you spray HyperCoat on and make the polymer layer uneven.\u003c\/p\u003e\n\u003cp\u003eStep 2 — apply HyperCoat: spray the product evenly onto the wet car. With spray bottles: panel by panel, top to bottom, about 20–30 cm off the surface with an even spray pattern. For larger vehicles (van, SUV) a foam sprayer or pressure pump gives you a more even and faster spread. Dwell time: 30–60 seconds per panel, where the polymers can grab onto the surface. Don't let it dry out.\u003c\/p\u003e\n\u003cp\u003eStep 3 — rinse: rinse the whole car down evenly with clean water (hose or pressure washer on a low setting). HyperCoat spreads itself over the surface as you rinse, and surplus amounts flush off. After rinsing: dry the car (with a clean drying towel or a forced-air blower) and check the result. An even, light gloss and visible beading tell you the application worked.\u003c\/p\u003e\n\u003cp\u003eIn wash bays, HyperCoat can be folded into the automated wash process as the last step before drying — through dosing units or dedicated spray bars in the final rinse section. This use is especially economical, since HyperCoat can be dosed in bulk and the extra value for the customer (visible gloss, water beading) can be marketed as a premium wash service.\u003c\/p\u003e\n\n\u003ch3\u003eWhere HyperCoat fits — when a wet sealant is the right call\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHyperCoat\u003c\/strong\u003e is especially worth its weight in specific scenarios. Wash bays and pro valeting businesses as a premium add-on: the offer \"wash + HyperCoat seal\" is attractive to customers who want more than just a clean but unprotected car. The extra time in the wash is minimal, the value the customer notices (visible gloss, beading) is big — a tidy add-on service argument for lifting revenue per car.\u003c\/p\u003e\n\u003cp\u003eRegular care for fleet operators: when a lot of vehicles have to be washed at short intervals, HyperCoat as an integrated wash finish pays off: no separate sealing appointment, no drying before sealing, no fiddly application process. The paint on the fleet vehicles stays in a cared-for state for the long haul, which protects resale value and heads off complaints about scruffy-looking company cars.\u003c\/p\u003e\n\u003cp\u003eAs a topper for cars with an existing ceramic coating: ceramic sealants lose their lotus effect over time while the actual protective layer is still intact. HyperCoat as a topper after every wash reactivates the hydrophobicity and stretches out how long the customer's impression of the ceramic coating lasts — without touching the ceramic layer itself or calling for fiddly ceramic refresh work. That keeps customers happy longer and pushes back the point of a full re-seal.\u003c\/p\u003e\n\n\u003ch3\u003eHyperCoat vs. Spray+Seal and dry sealants — the right seal for every workflow\u003c\/h3\u003e\n\u003cp\u003eThe SONAX PROFILINE sealing range has several wet sealant and quick sealant products for different scenarios. The \u003ca href=\"\/en\/products\/sonax-profiline-spray-seal-nassversiegelung\"\u003eSONAX PROFILINE Spray+Seal\u003c\/a\u003e is a similar wet sealant available in 5 litres for high-volume wash-bay integration — the more economical option for businesses with heavy vehicle throughput and a dosing system. HyperCoat in 1 litre suits smaller businesses and manual application better.\u003c\/p\u003e\n\u003cp\u003eAgainst dry sealants (PolymerNetShield, ceramic coatings), HyperCoat sits below on protection and durability — a fundamental trade-off for the time saving. Dry sealants give you several months to years of lasting protection from a single application, while a wet sealant has to be refreshed after a few weeks or several washes. The upside of a wet sealant is its simplicity and the way it folds into the wash — if you're happy to run HyperCoat regularly, you can keep cars protected for the long haul with minimal effort.\u003c\/p\u003e\n\u003cp\u003eFor an ideal strategy we'd suggest: once a year a full dry sealant (PolymerNetShield or a ceramic coating) as a long-term protective layer, backed up by regular HyperCoat after every wash as ongoing care. That combo gives you both maximum long-term protection and regular top-ups of beading and gloss — the complete care concept for professionally looked-after vehicles.\u003c\/p\u003e\n\n\u003ch3\u003eBuying SONAX PROFILINE HyperCoat — sizes and usage advice\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE HyperCoat\u003c\/strong\u003e comes in 1 litre. The 1-litre size is the right one for manual application in smaller businesses and for individual users — with a sparing dose (1–2 ml per panel) a litre stretches across plenty of applications. The wet sealant is ready to use and needs no diluting before you start — spraying it straight from the bottle or a spray vessel is the recommended way to use it.\u003c\/p\u003e\n\u003cp\u003eFor wash bays and large operations that want to fold HyperCoat systematically into the wash, we'd suggest pairing it with Spray+Seal in 5 litres for the more economical supply. The two wet sealants complement each other: HyperCoat for manual jobs and as a premium add-on in the hand-wash area, Spray+Seal for automated dosing in the wash-bay section. Together they cover a professional business's wet sealant needs in full.\u003c\/p\u003e\n\u003cp\u003eBottom line, the SONAX PROFILINE HyperCoat is the ideal product for any business or user that wants to fold paint protection and gloss into the regular wash with no added effort. The wet sealant tech delivers visible value for car and customer after every wash — with minimal time spent and strong economics in day-to-day running.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57345101824335,"sku":"D1-SNX-6773000","price":28.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-hypercoat_1liter.png?v=1774731856"}],"url":"https:\/\/detailing1depot.com\/en\/collections\/profiline-nassversiegelung.oembed","provider":"Detailing1","version":"1.0","type":"link"}