{"title":"Multipurpose Cleaner — SONAX","description":null,"products":[{"product_id":"sonax-profiline-multistar-all-purpose-cleaner-universalreiniger","title":"PROFILINE MultiStar \"All-Purpose-Cleaner\" Universal Cleaner","description":"\u003ch2\u003eA concentrate for all cleaning tasks — SONAX PROFILINE MultiStar\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE MultiStar do? The versatile universal cleaner concentrate dissolves grease, oil, rust film, and general dirt on vehicle surfaces both inside and out — in freely selectable dilutions for varying cleaning intensities, and in large containers up to 200 liters for economical professional use.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn detailing centers, car washes, and fleet maintenance facilities, the demand for a reliable, economical universal cleaner is consistently high. Individual products for interiors, exterior paint, engine compartments, rims, and machinery mean increased storage effort, frequent reorders, and unnecessary complexity. The \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e is the universal concentrate cleaner for all these applications: an alkaline cleaning formula suitable for most cleaning tasks in vehicle and operational areas at various dilution levels — and, thanks to container sizes from 1 liter to 200 liters, it's economically scalable for any operational scope.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversally applicable due to variable dilution system.\u003c\/strong\u003e MultiStar is supplied as a concentrate and diluted with water before use — the dilution rate determines the cleaning intensity: low dilution (1:5 to 1:10) for heavy soiling such as engine oil, bitumen residues, and stubborn dirt; medium dilution (1:20 to 1:50) for general vehicle cleaning; high dilution (1:50 to 1:100) for more sensitive areas like interior plastics or lighter dirt. One concentrate, many uses.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlkaline formula reliably dissolves organic contaminants.\u003c\/strong\u003e MultiStar's alkaline surfactant formula is optimized for dissolving organic contaminants: grease, oil, brake dust, tire abrasion, and general vehicle dirt are loosened and made water-soluble by the combination of alkaline pH and active surfactants. The formula is compatible with most common vehicle surfaces — paint, plastic, rubber, metal, and textile react well to the universal cleaner when properly diluted.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLarge containers up to 200 liters for economical professional use.\u003c\/strong\u003e Available container sizes range from 1 liter for small businesses and occasional users to 200-liter drums for large operations and car washes. The price per liter significantly decreases with increasing container size, making MultiStar particularly attractive for businesses that use large quantities of cleaner daily. The concentrate concept also significantly reduces transport weight and storage space requirements compared to ready-to-use cleaners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e For effective use, we recommend keeping MultiStar in labeled spray bottles at various dilutions — e.g., 1:10 for engine compartments and rims, 1:30 for general exterior cleaning, 1:50 for interiors. This ensures the correct concentration is always at hand without having to mix new batches every time. Do not use on painted surfaces in direct sunlight or on very hot surfaces — rapid drying of alkaline cleaners can leave streaks. For acid-resistant dirt (lime, mineral residues), \u003ca href=\"\/en\/products\/sonax-profiline-multiclean-acid-kraftreiniger-sauer\"\u003eSONAX PROFILINE MultiClean Acid\u003c\/a\u003e is the better choice, as alkaline cleaners cannot perform acidic dissolution reactions. Always rinse thoroughly to remove cleaning residues — especially on paint and rubber.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eConcentrate technology — why dilution makes MultiStar so flexible\u003c\/h3\u003e\n\u003cp\u003eThe concentrate concept of \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e offers a decisive economic and logistical advantage over ready-to-use cleaners: The cleaning substances (surfactants, alkalis, builders) are supplied in highly concentrated form and only diluted with water at the point of use. This means that a 1-liter concentrate container holds the cleaning substance for 50–100 liters of ready-to-use cleaner — a 1-liter concentrate container has the same cleaning value as a 50-liter container of ready-to-use cleaner, but transports only a fraction of the weight and volume.\u003c\/p\u003e\n\u003cp\u003eThe alkaline action of MultiStar is based on two mechanisms: First, the alkaline pH value (typically pH 9–11 in the concentrate) increases the solubility of organic fat molecules — fats and oils are saponified in an alkaline environment, making them water-soluble and easier to wipe off. Second, the surfactants encapsulate dirt particles through micelle formation and suspend them in the aqueous cleaning solution, so they are carried away with the water during rinsing. This combination is very effective against most organic vehicle contaminants.\u003c\/p\u003e\n\u003cp\u003eThe dilution flexibility allows the same basic cleaner to be used for very different cleaning intensities: In the engine compartment, where stubborn oil and grease are to be removed from hard, heat-resistant surfaces, a strong concentration (1:5) is appropriate and the surfaces tolerate the higher alkalinity. For the vehicle interior, where sensitive plastics, textiles, and Alcantara are treated, a strong dilution (1:50 or more) is necessary to avoid surface damage. The correct ratio is the critical operating skill — too diluted, the cleaner will not be sufficiently effective; too little diluted, it can attack surfaces or leave residues.\u003c\/p\u003e\n\u003cp\u003eFor businesses that use MultiStar in foam lances or high-pressure cleaners, the foaming tendency is relevant: MultiStar foams evenly and adheres well in the foam pre-wash mode when properly diluted and applied, which extends the dwell time on dirty surfaces and improves cleaning performance. Foam consistency can be adjusted by dilution and the use of suitable foam lance nozzles.\u003c\/p\u003e\n\n\u003ch3\u003eApplying MultiStar correctly — dilution ratios for every area of use\u003c\/h3\u003e\n\u003cp\u003eThe application of MultiStar concentrate begins with the correct dilution rate for the respective area of use. For engine washing and heavy exterior dirt: Dilution 1:5 to 1:10 (10–20% concentrate) — spray directly onto the soiled area, allow to dwell for 2–3 minutes, without letting it dry, then rinse with water. For rim cleaning and underbody washing: Dilution 1:10 to 1:20 (5–10% concentrate) — similar application method as for engine washing.\u003c\/p\u003e\n\u003cp\u003eFor general vehicle cleaning and pre-cleaning: Dilution 1:20 to 1:50 (2–5% concentrate) — suitable as a foam lance pre-cleaner or for hand washing with a sponge. This dilution is gentle on paintwork and plastic surfaces and leaves no damaging alkaline residues. For interior cleaning and textiles: Dilution 1:50 to 1:100 (1–2% concentrate) — particularly gentle on sensitive surfaces; always test on an inconspicuous area before widespread use on Alcantara or sensitive coatings.\u003c\/p\u003e\n\u003cp\u003eImportant application notes: Always dilute MultiStar freshly and do not store diluted solutions in spray bottles for long, as diluted alkaline solutions can lose effectiveness over time and become unusable due to germ growth. When working with undiluted concentrate, ensure skin and eye protection — highly concentrated alkaline solutions can cause skin irritation. Store the concentrate itself in dry, cool conditions — in its undiluted state, the concentrate remains stable for several years with proper storage.\u003c\/p\u003e\n\n\u003ch3\u003eAreas of application for MultiStar — when the universal cleaner is the most efficient solution\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e is particularly efficient in businesses that want to cover a wide range of cleaning tasks with a single product. Detailing businesses with diverse vehicle types (cars, vans, trucks) appreciate the flexibility: A single concentrate unit can be used for the engine compartment of a van, the interior cleaning of a car, and the pre-cleaning of a truck — each with the appropriate dilution. Stockkeeping is simplified, and the ordering process becomes more efficient.\u003c\/p\u003e\n\u003cp\u003eFleet managers and fleet care centers with regular cleaning intervals particularly benefit from the large containers: The 25-liter or 60-liter container allows for continuous supply without frequent reorders, and the more favorable pricing scale for large containers reduces cleaning costs per vehicle. The 200-liter drum size is designed for central cleaning systems where the cleaner is fed directly into machines or foam generators.\u003c\/p\u003e\n\u003cp\u003eCompared to specialized cleaners like \u003ca href=\"\/en\/products\/sonax-profiline-multiclean-alkaline-vorreiniger\"\u003eSONAX PROFILINE MultiClean Alkaline\u003c\/a\u003e — which was developed as an optimized pre-cleaner for cold foam pre-wash — MultiStar offers a broader dilution spectrum and more areas of application, but consequently less specialization in the pre-wash area. Those who exclusively do pre-washing are better served with MultiClean Alkaline; those who are looking for a single cleaner for all tasks are optimally equipped with MultiStar concentrate.\u003c\/p\u003e\n\n\u003ch3\u003eMultiStar in comparison — universal cleaner vs. specialized cleaner in professional operation\u003c\/h3\u003e\n\u003cp\u003eThe question of whether a universal cleaner concentrate like MultiStar or a range of specialized cleaners is the better choice depends on the operational structure. A universal cleaner offers simplicity, cost savings through large containers, and flexibility — ideal for small to medium-sized businesses that do not want to cover every cleaning task with a specialized product. For particularly demanding cleaning tasks (lime removal → acidic cleaner, rims with heavy iron particle contamination → dedicated rim cleaner, sensitive displays → SensitiveSurface Detailer), specialized products are clearly superior.\u003c\/p\u003e\n\u003cp\u003eA proven strategy in well-equipped detailing businesses is a combination: MultiStar as the basic universal cleaner for 80% of all daily cleaning tasks, supplemented by one to three specialized products for applications where the universal cleaner is insufficient. This concept maximizes economic efficiency (one main product in large containers) while simultaneously providing optimal cleaning performance for specific requirements. The combination of MultiStar + MultiClean Acid + dedicated rim cleaner, for example, fully covers the entire spectrum of alkaline and acidic cleaning requirements in the vehicle sector.\u003c\/p\u003e\n\u003cp\u003eCompared to universal cleaners from other manufacturers, SONAX PROFILINE MultiStar offers the advantage of proven system compatibility with other PROFILINE products and a professional formulation designed for the specific requirements of the vehicle segment. Household universal cleaners are often optimized for other surfaces (floors, glass) and can leave residues or streaks on vehicle paint and sensitive plastics. The PROFILINE concentrate is tested for vehicle applications and certified for its compatibility with vehicle surfaces accordingly.\u003c\/p\u003e\n\n\u003ch3\u003eBuying SONAX PROFILINE MultiStar — containers, pricing, and business recommendations\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE MultiStar\u003c\/strong\u003e is available in 1 liter, 5 liter, 10 liter, 25 liter, 60 liter, and 200 liter sizes. For individual users and small businesses, the 1-liter container offers a manageable entry size — the concentrate is economical, and one liter covers several weeks or months for a small business. The 5-liter container is the most economical standard size for medium-sized businesses, while the 25-liter canister is the preferred option for larger businesses with daily demand.\u003c\/p\u003e\n\u003cp\u003eThe pricing scale between the 1-liter and 60-liter containers is significant — the price per 100 ml of concentrate is considerably lower for the 60-liter container than for the 1-liter container. For car washes and fleet maintenance that use several liters of cleaner daily, the investment in the large container quickly pays for itself. The 200-liter drum is designed for industrial cleaning systems and central supply installations where the cleaner is fed directly into dosing pumps or automatic mixing systems.\u003c\/p\u003e\n\u003cp\u003eIn summary, SONAX PROFILINE MultiStar is the most economical choice for businesses seeking a reliable, versatile universal cleaner of professional quality. Its concentrate concept, broad dilution flexibility, and availability in large containers make it the ideal basic cleaner in the PROFILINE range — supplemented by specialized products for particular cleaning requirements.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":53505896055119,"sku":"D1-SNX-6273410","price":8.32,"currency_code":"EUR","in_stock":true},{"title":"2x 1 Liter Set","offer_id":53505896087887,"sku":"D1-SNX-6273410_2","price":16.64,"currency_code":"EUR","in_stock":true},{"title":"3 x 1 Liter Set","offer_id":53505896120655,"sku":"D1-SNX-6273410_3","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"5 liters","offer_id":53505896153423,"sku":"D1-SNX-6275050","price":34.32,"currency_code":"EUR","in_stock":true},{"title":"10 liters","offer_id":53505904017743,"sku":"D1-SNX-6276000","price":60.87,"currency_code":"EUR","in_stock":false},{"title":"25 liters","offer_id":53505904050511,"sku":"D1-SNX-6277050","price":149.23,"currency_code":"EUR","in_stock":false},{"title":"60 liters","offer_id":53505904083279,"sku":"D1-SNX-6278000","price":510.03,"currency_code":"EUR","in_stock":false},{"title":"200 liters","offer_id":53505904116047,"sku":"D1-SNX-6279000","price":1582.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-multistar-all-purpose-cleaner-universalreiniger.png?v=1730463356"},{"product_id":"sonax-profiline-all-purpose-cleaner-foam-universalreiniger","title":"PROFILINE All-Purpose-Cleaner \"Foam\" APC","description":"\u003ch2\u003eAn all-purpose cleaner in foam form — SONAX PROFILINE All-Purpose-Cleaner \"Foam\"\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is an All-Purpose-Cleaner Foam and what do you use it for? The \u003cstrong\u003eSONAX PROFILINE All-Purpose-Cleaner \"Foam\"\u003c\/strong\u003e is a foam-based all-purpose cleaner in a 400 ml aerosol can — the foam holds the cleaner on vertical surfaces, stretches the dwell time and lets you clean textile, plastic, carpet and interior surfaces with a single product.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eMost surfaces inside a car sit vertical or steeply angled: door cards, A-pillars, the dashboard and seat backs. Classic liquid cleaners run straight off these surfaces and barely get any dwell time before they drip to the floor. The \u003cstrong\u003eSONAX PROFILINE All-Purpose-Cleaner \"Foam\"\u003c\/strong\u003e solves that with a different product format: as a spray foam it clings to vertical surfaces and keeps the cleaning agent right where you need it. The stable foam stretches the dwell time on hard-to-reach and vertical surfaces by a long way — no running off, no wasted product. The 400 ml aerosol can is the compact, ready-to-use answer for interior cleaning in pro work.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFoam-based agent for maximum dwell time on vertical surfaces.\u003c\/strong\u003e Once you spray it on, the APC Foam clings to the surface and releases the cleaning agent steadily over several minutes. That longer dwell time matters most with crusted-on stains, dried-in dirt and grease build-up on plastic surfaces — the active substances get time to emulsify the dirt particles before you go back over with the cloth. The result is a more thorough clean with less elbow grease.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile on textile, plastic, carpet and interior surfaces.\u003c\/strong\u003e A true all-purpose cleaner doesn't need different products for different interior surfaces: the APC Foam cleans plastic dashboards, fabric seats, Alcantara surfaces, velour carpets, rubber seals and faux leather with the same technique. That trims the product stock you keep on hand and boils interior cleaning down to a single product for nearly every surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact aerosol format for quick reach and clean handling.\u003c\/strong\u003e The 400 ml format is built for mobile work and grab-and-go availability: the can fits in any tool bag and is ready to use with no decanting or diluting. Unlike concentrate products that have to be measured out and poured into spray bottles, the APC Foam works straight from the can — ideal for mobile detailers and for a quick touch-up between detailing steps.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Spray the PROFILINE APC Foam onto the surface you want to clean, let it dwell for 1–2 minutes and lift it off with a lightly damp microfibre cloth. On textile and carpet it pays to work the foam in with a soft brush before you take it off with the cloth — that way the dirt bound up in the fibres lets go more completely. On delicate surfaces like Alcantara or pale fabrics, test on a hidden spot first. As a pre-clean before a \u003ca href=\"\/en\/products\/sonax-profiline-fabriccoating-textilimpragnierung\"\u003eSONAX PROFILINE FabricCoating textile sealant\u003c\/a\u003e the APC Foam is a solid pick — it cleans thoroughly without harsh solvents that would damage the textile structure.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eHow the APC Foam is formulated — foam-based cleaning and pH value\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ePROFILINE All-Purpose-Cleaner \"Foam\"\u003c\/strong\u003e carries a mix of surfactants and emulsifiers, brought to a stable foam consistency in an aerosol formulation with propellant. The surfactants in the APC Foam are built for a broad range of dirt: they emulsify fats and oils (the typical marks on steering wheels and gear knobs), break the dust bonds on plastic (that familiar \"sticky film\" on old dashboards) and back up the mechanical lift of dried-in dirt on carpets.\u003c\/p\u003e\n\n\u003cp\u003eThe pH value of the APC Foam sits in the slightly alkaline range — strong enough to clean effectively, but gentle enough for delicate surfaces like Alcantara and dyed textiles. Strongly acidic or strongly alkaline cleaners would attack the colour on Alcantara and damage that signature suede look. The mild formulation of the APC Foam is tuned to the varied demands of a car interior.\u003c\/p\u003e\n\n\u003cp\u003eOne technical point that often gets overlooked day-to-day: shaking before use matters more with spray-foam products than with liquid cleaners. The propellant and the active agent can separate inside the can when it sits unused for a while. A solid 5–10-second shake before use gives you even foam quality and the best cleaning action. Spray without shaking and you often get almost pure propellant with no agent first — which is why that supposed \"first spray\" does nothing.\u003c\/p\u003e\n\n\u003cp\u003eThe foam in the APC Foam is formulated to stay stable for 2–4 minutes after you lay it down, then slowly collapse into a lightly damp, cleaning-active layer. That collapse point is the ideal moment for the mechanical clean with cloth or brush: the cleaner has worked its way into the surface by then and the loosened dirt comes off completely.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the APC Foam — interior cleaning, surfaces and dwell time\u003c\/h3\u003e\n\n\u003cp\u003eThe standard run for interior cleaning with the APC Foam: shake the can, spray evenly onto the surface you want to clean (about 15–20 cm away), let it dwell for 1–3 minutes, wipe off with a soft microfibre cloth and follow up with a dry cloth if needed. On carpets and upholstery it pays to work the foam in mechanically with a soft brush before you wipe — that lifts more deeply embedded dirt than wiping alone.\u003c\/p\u003e\n\n\u003cp\u003eFor heavily soiled or strongly odour-laden textile areas (driver-side carpets with ground-in dirt, rear seats with kids' stains), a two-pass approach works well: spray and work in a first coat, take it off roughly with a dry cloth, then a second coat for the finishing clean. The two-layer method pulls out stubborn stains that the first pass only loosened through the dirt and that come off completely on the second.\u003c\/p\u003e\n\n\u003cp\u003eA common use in the pro world is spot treatment: you can target single stains on upholstery or carpets with the APC Foam without cleaning the whole seat. The foam sprays precisely onto the stain without wetting the neighbouring clean area. That comes in handy in day-to-day dealership work, where a showroom car has to be back in perfect shape fast after a customer's been in it — with no full interior clean. Single fingerprints on Alcantara, fresh coffee marks on the carpet mat or dirt streaks on the steering wheel are gone in minutes.\u003c\/p\u003e\n\n\u003cp\u003eIn a pro detailing operation the APC Foam works for a quick interior clean between the exterior detail and handover: 10–15 minutes to clean the key interior surfaces (dashboard, door cards, carpets) with the APC Foam, and the car is in handover-ready shape — no full deep-clean process needed.\u003c\/p\u003e\n\n\u003ch3\u003eWhere the APC Foam works — interior, boot and detail cleaning\u003c\/h3\u003e\n\n\u003cp\u003eThe APC Foam covers every textile and hard surface inside the car: dashboard and centre console in hard plastic, door cards with a fabric or faux-leather panel, seat surfaces in fabric or Alcantara, textile headliners, carpet on the floor and in the boot, plus rubber seals on doors and windows. For each of these surfaces the APC Foam works as a single product — no product swap, no extra measuring of concentrates.\u003c\/p\u003e\n\n\u003cp\u003eHeadliners call for extra care: the headliner is often a textile material with an adhesive layer underneath. Cleaning too wet or letting cleaners dwell too long can loosen that adhesive on older cars, which leads to the headliner sagging. The APC Foam is gentle enough for headliners as long as you apply it sparingly and don't lay it on in excess. Short dwell time (1 minute) and gentle dabbing instead of rubbing protects the headliner adhesive. On very old cars, or where the headliner is visibly starting to sag, skip aggressive wet cleaning altogether.\u003c\/p\u003e\n\n\u003cp\u003eBeyond the interior, the APC Foam also suits quick detail cleaning on exterior parts: engine-bay plastic trim, boot carpets and boot liners can be cleaned with the same product. You can use it on metal surfaces, but that isn't the main use case — for paint and wheels there are more specialised products in the PROFILINE range.\u003c\/p\u003e\n\n\u003ch3\u003eThe APC Foam compared — all-purpose cleaners in the PROFILINE range\u003c\/h3\u003e\n\n\u003cp\u003eWithin the PROFILINE interior cleaning range the APC Foam rounds out the other cleaning products: the \u003ca href=\"\/en\/products\/sonax-profiline-innenreiniger-innenraumreiniger\"\u003eSONAX PROFILINE InnenReiniger\u003c\/a\u003e is a classic liquid interior cleaner for the base clean with a spray bottle; the \u003ca href=\"\/en\/products\/sonax-profiline-cleanstar-ecocert-innenraumreiniger\"\u003eSONAX PROFILINE CleanStar \"Ecocert\"\u003c\/a\u003e is the eco-certified, mild all-rounder for delicate surfaces. The APC Foam rounds these out as the format for quick, vertical-surface cleaning — where a liquid cleaner doesn't cling efficiently.\u003c\/p\u003e\n\n\u003cp\u003eFor operations cleaning a lot of car interiors regularly, the APC Foam makes sense alongside a concentrate-based interior cleaner: the concentrate for the large-area base clean, the APC Foam for the detail work on hard-to-reach or vertical spots. The combination of both product formats covers every interior cleaning need efficiently.\u003c\/p\u003e\n\n\u003ch3\u003eBuy the SONAX PROFILINE All-Purpose-Cleaner \"Foam\" — for interior cleaning and detail work\u003c\/h3\u003e\n\n\u003cp\u003eThe 400 ml format of the APC Foam is ideal for mobile detailers, interior cleaning pros and operations after a compact interior cleaning solution for quick work. The aerosol format makes handling especially easy: no decanting, no diluting, ready to use right away. Dosing through the can's spray head is easy to control — too much foam on delicate surfaces is easy to meter back.\u003c\/p\u003e\n\n\u003cp\u003eStoring aerosol products like the APC Foam means following a few ground rules: temperatures above 50 °C (in a car interior in summer, say, or near radiators) can raise the internal pressure of the can and lead to damage. So keep the can out of direct sunlight and don't leave it lying in hot cars. Stored properly below 25 °C and away from any direct heat source, the product is stable and keeps without limits.\u003c\/p\u003e\n\n\u003cp\u003eFor operations with very high interior cleaning demand, the combination of APC Foam for details and a larger interior-cleaner concentrate for the base clean works well — that way the APC Foam isn't your daily high-volume cleaner but the specialist product for quick, precise jobs. As a verified SONAX dealer at Detailing1, the PROFILINE APC Foam is part of the regular range.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"400 ml","offer_id":57344925073743,"sku":"D1-SNX-2743000","price":7.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-all-purpose-cleaner-foam_400ml.png?v=1774730099"},{"product_id":"sonax-profiline-microfibre-wash-mikrofaserwaschmittel","title":"PROFILINE Microfibre Wash Microfiber Detergent","description":"\u003ch2\u003eHow to professionally wash and recondition microfiber towels — SONAX PROFILINE Microfibre Wash\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat does SONAX PROFILINE Microfibre Wash do? This specialized detergent for microfiber towels cleans polish, wax, and coating residues from fine fibers, restores original absorbency, and protects the fiber structure from premature wear.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eMicrofiber towels are the most frequently used consumable in professional detailing: each vehicle uses a dozen or more towels for various tasks — polish removal, sealant application, glass cleaning, interior work. Investing in high-quality towels like the \u003ca href=\"\/en\/products\/sonax-profiline-coating-towel-mikrofasertuch\"\u003eSONAX PROFILINE Coating Towel\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/sonax-profiline-microfasertuch-glas-mikrofasertuch\"\u003eSONAX PROFILINE Microfiber Cloth Glass\u003c\/a\u003e only pays off if the towels are washed correctly and maintained in a condition that retains their original performance over many uses. Standard detergents fail here: they are not formulated for the chemical residues from detailing, leave fabric softener residues that clog the fibers, and degrade the fiber structure over time. The \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e is the specially formulated detergent for the demands of professional detailing: It completely dissolves polish, wax, silicone, and coating residues from microfibers, avoids fabric softeners that gum up the fibers, and protects the fine fiber structure that makes up the absorbency and scratch-free character of the towels. Available in 1000 ml.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompletely dissolves polish, wax, and coating residues from microfiber towels.\u003c\/strong\u003e The typical residues after detailing work are a challenge for standard household detergents: hardened polish residues, dried wax particles, silicone residues from care products, and cured ceramic overcoat residues block the microfibers and noticeably reduce their absorbency. SONAX PROFILINE Microfibre Wash is formulated specifically for these residues and dissolves them without aggressive chemicals that would damage the fibers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFabric softener-free — preserves the absorbency and cleaning performance of microfibers.\u003c\/strong\u003e Fabric softener is the enemy of high-quality microfiber towels: the substances contained in fabric softener deposit on the microfibers and seal their surface — the towel feels soft, but absorbs significantly less. SONAX PROFILINE Microfibre Wash completely refrains from fabric softener substances, so that the fibers have the same absorbency after washing as a new towel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProtects fine fiber structures — significantly extends the lifespan of high-quality microfiber towels.\u003c\/strong\u003e High-quality microfiber towels for ceramic application, glass cleaning, and polish removal are not cheap. Those who care for them with incorrect detergents destroy the quality invested. SONAX PROFILINE Microfibre Wash extends the useful life through fiber-friendly formulation and cleaning that does not deform the fiber geometry. A towel that lasts ten times longer amortizes the investment in the detergent many times over.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e Separate towels by intended use and wash them separately — coating towels with hardened ceramic residues require a different wash cycle than normal polishing towels. Add SONAX PROFILINE Microfibre Wash in the correct dosage (follow manufacturer's instructions, typically 50–100 ml per wash cycle) directly into the washing machine, wash towels at 30–40°C without a spin cycle. A spin cycle deforms the microfiber pile. Never wash with textiles made of other materials — cotton lint settles into the microfibers and permanently reduces cleaning performance. Air dry towels after washing, do not tumble dry — heat can alter fiber geometry. For coating towels with heavy residues, pre-soak briefly in lukewarm water with a few drops of Microfibre Wash, then wash — this loosens dried residues before machine cleaning.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFormulation and Mechanism — how SONAX PROFILINE Microfibre Wash dissolves detailing residues\u003c\/h3\u003e\n\u003cp\u003eThe challenge in washing detailing microfiber towels lies in the variety of residues that need to be removed. A polishing pad removal towel after a day's work contains a mixture of abrasive particle residues, oil-based polish carrier substance, color pigments from the treated paint, and possibly silicone from lubricant additives in the polish. A \u003ca href=\"\/en\/products\/sonax-profiline-coating-towel-mikrofasertuch\"\u003eCoating Towel\u003c\/a\u003e contains SiO₂ or ceramic particles that, depending on the degree of curing, can be firmly embedded in the fibers. A glass cleaning towel contains surfactant residues and mineral residues from hard water.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e addresses these different types of residues through a formulation that relies on multiple dissolving mechanisms: surfactants that encapsulate and emulsify fat-based polish residues, complexing agents that dissolve mineral deposits from lime residues or abrasive particles, and a neutral to slightly basic pH base that also dissolves inorganic coating particles without attacking the polyester fibers of the microfiber itself. The formulation explicitly does not contain cationic surfactants — these are the compounds in fabric softeners that are responsible for the soft feel, but at the same time clog the fibers.\u003c\/p\u003e\n\u003cp\u003eThe result after a wash with SONAX PROFILINE Microfibre Wash is a towel that absorbs like new again: the fibers are free of residues, the capillary action of the microfibers is restored, and the surface of the towel is again even without hardened areas. If you wet a polishing pad removal towel with water after washing and then wring it out, you immediately notice the difference: after a correct Microfibre Wash cycle, the towel releases significantly more water when wrung out and then quickly absorbs again — a sign that the fiber channels are free.\u003c\/p\u003e\n\n\u003ch3\u003eWhich towels benefit from SONAX PROFILINE Microfibre Wash — compatibility at a glance\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e is suitable for all high-quality microfiber towels in the detailing sector — both within the SONAX PROFILINE system and for microfiber towels from other manufacturers. In the SONAX PROFILINE system, the most important towels that benefit from correct care with Microfibre Wash are: the SONAX PROFILINE Coating Towel for ceramic application (here, correct care is particularly important, as hardened ceramic residues can quickly render the towel unusable), the SONAX PROFILINE Microfiber Cloth Glass for streak-free glass cleaning (here, fabric softener residues immediately worsen streak performance), and all standard microfiber towels used for polish removal, detailer application, and interior cleaning.\u003c\/p\u003e\n\u003cp\u003eFor foam applicator pads like the SONAX PROFILINE CoatingApplicator, Microfibre Wash is less relevant — foam pads are cleaned differently. Wool pads and lamb wool pads are also not washed with Microfibre Wash, as their wool fibers have different care requirements than synthetic microfibers. Microfibre Wash is specifically optimized for synthetic microfibers (polyester\/polyamide blended fabrics), which make up the majority of professional detailing towels.\u003c\/p\u003e\n\u003cp\u003eA special application is the initial use of new microfiber towels: even brand new towels can contain finishing residues from textile production that limit absorbency during the first use. A wash cycle with SONAX PROFILINE Microfibre Wash before the first use removes these manufacturing residues and ensures that the towel performs at its full capacity from the very first use. This preparation is particularly recommended for expensive specialized towels such as the Coating Towel.\u003c\/p\u003e\n\n\u003ch3\u003eUse in professional operations — dosage, wash program, and quantity requirements\u003c\/h3\u003e\n\u003cp\u003eIn professional detailing operations with high towel throughput, the efficient use of \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e is part of operational economics. Correct dosage is central: too little detergent cleans incompletely and leaves residues in the fibers. Too much detergent means unnecessary costs and possibly surfactant residues if the wash cycle does not rinse sufficiently. The manufacturer's recommendation, depending on water temperature and load, is 50–100 ml per standard wash cycle (5–7 kg fill weight) — for towels with very heavy residues (e.g., coating towels after ceramic application), the dosage can be at the higher end.\u003c\/p\u003e\n\u003cp\u003eThe recommended wash program for detailing microfiber towels: 30–40°C delicate cycle without fabric softener, medium spin speed (maximum 400–600 rpm), delicate wash program if available. Higher temperatures (60°C and more) clean more aggressively but can compress the fiber cross-sections in synthetic microfibers and permanently reduce capillary action. If you want to be on the safe side: 30°C and a double rinse program combined with the correct Microfibre Wash dosage delivers very good results without thermal stress for the fibers.\u003c\/p\u003e\n\u003cp\u003eFor quantity planning: A 1-liter container of SONAX PROFILINE Microfibre Wash, with consistent use, is sufficient for 10–20 wash cycles, depending on dosage and load. For an operation that washes three times a week, one liter is sufficient for four to six weeks. This makes Microfibre Wash a very economical operating supply: the protective effect for the significantly more expensive microfiber towels, whose lifespan can be tripled by correct care, far outweighs the cost of the detergent.\u003c\/p\u003e\n\n\u003ch3\u003eComparison with household detergents and alternative products — why specialized cleaning is crucial\u003c\/h3\u003e\n\u003cp\u003eThe question of whether commercially available detergents or alternative products do the same job as \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e comes up again and again. The short answer: not equivalent for professional detailing use. Here is the direct comparison. Standard heavy-duty detergents (Persil, Ariel, and similar) are designed for cotton and blended fabrics at 40–95°C. They often contain optical brighteners that can settle on dark microfiber towels and, when used as a polish removal towel, leave white streaks on the paint. In addition, many heavy-duty detergents contain cationic surfactants or are combined with fabric softeners that clog the fiber capillaries.\u003c\/p\u003e\n\u003cp\u003eDelicate detergents like Perwoll are gentler on fibers and more fabric softener-free than heavy-duty detergents, but also not formulated for the specific residues of vehicle detailing. Polish oils, silicone residues, and SiO₂ particles from ceramic coatings are significantly more stubborn than normal textile dirt. Delicate detergents emulsify these substances less effectively than a product optimized for detailing chemicals. The result: the towel is optically clean after washing, but the fibers are not completely freed from polish oil residues — in the next use, the towel releases these residues onto the freshly polished paint and can create streaks that impair the polishing result.\u003c\/p\u003e\n\u003cp\u003eSome detailers use diluted \u003ca href=\"\/en\/products\/sonax-profiline-all-purpose-cleaner-foam-universalreiniger\"\u003eSONAX PROFILINE All-Purpose-Cleaner\u003c\/a\u003e as a pre-treatment for heavily soiled towels — this is useful for rough pre-washing, but does not replace the final wash cycle with SONAX PROFILINE Microfibre Wash, which rinses the remaining emulsified residues from the fibers and protects the fiber geometry. The combination of pre-wash with an all-purpose cleaner and main wash with Microfibre Wash is the most effective workflow for towels with heavy polish or coating contamination — the pre-wash breaks down the roughest residues, and the main wash restores the fibers' original absorbency.\u003c\/p\u003e\n\n\u003ch3\u003eBuying SONAX PROFILINE Microfibre Wash — when it's worth it and how it's used\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE Microfibre Wash\u003c\/strong\u003e is available in a 1000 ml bottle and is aimed at anyone who uses professional microfiber towels in the detailing sector and wants to protect their investment. The decision for a specialized detergent is a decision for the economic use of the towel stock: anyone who buys ten SONAX PROFILINE Coating Towels for several euros each and then irreparably damages them with standard detergent after five uses has lost more money than the annual cost of Microfibre Wash would be.\u003c\/p\u003e\n\u003cp\u003eFor detailing enthusiasts who occasionally detail a vehicle and use a smaller number of towels, Microfibre Wash is already useful for ten to twenty towels — even a single Coating Towel whose lifespan triples from five to twenty uses exceeds the price of a liter container of Microfibre Wash. For professional operations, Microfibre Wash is not an optional extra, but an integral part of operational procurement, just like polishes, sealants, or pads.\u003c\/p\u003e\n\u003cp\u003eConclusion: SONAX PROFILINE Microfibre Wash is the consistent complement to a high-quality microfiber towel inventory. It protects the investment in good towels, completely restores cleaning performance after each use, and ensures that the SONAX PROFILINE towel system of Coating Towel, Microfiber Cloth Glass, and other specialized towels retains its value for years. One liter of detergent for 10–20 wash cycles is one of the smallest and most profitable investments in professional detailing operations.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57345101627727,"sku":"D1-SNX-4523000","price":12.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-microfibre-wash_1liter.png?v=1774731871"}],"url":"https:\/\/detailing1depot.com\/en\/collections\/sonax-universalreiniger.oembed","provider":"Detailing1","version":"1.0","type":"link"}