{"product_id":"zvizzer-applikator-block-applikator-pad","title":"Applicator Block Applicator Pad","description":"\u003ch2 id=\"speakable-headline\"\u003eLay sealant on by hand, thin and even\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWhat is the ZviZZer Applicator Block? A two-layer foam applicator with a soft application side and a firm grip side that lays coatings, sealants, waxes and plastic care down thin and even by hand. It doesn't polish anything out and it removes no scratches — buffing off is the microfibre's job.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe ZviZZer Applicator Block\u003c\/strong\u003e is a handy application applicator from ZviZZer measuring 10 by 3 by 2 centimetres. It's built in two layers: the soft pad side lays the product evenly onto the surface, the firm side gives you grip in the hand. For sparingly dosed products like ceramic coatings, you wrap the low-absorption applicator cloth around the block.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandy block at 10 by 3 by 2 centimetres.\u003c\/strong\u003e The shape sits flat in your hand and runs cleanly along edges and body lines. The two layers split the jobs: soft side lays it down, firm side holds — so you dose with control instead of smearing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven application with no wasted product.\u003c\/strong\u003e Wrapped in the applicator cloth, the block barely soaks anything up, so 10 to 15 drops of coating cover a whole side of the car. A bare foam sponge would just drink part of that away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable across many application runs.\u003c\/strong\u003e After wax or care jobs, wring the block out under running water and let it dry — that way one block easily takes 10 or more uses. Cured coatings are the exception: there the block stays tied to that one coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common mistake is using a single applicator for everything. A block you use first for a coating and then for a wax drags cured residue and silicone oils into the next layer — the coating then bonds patchy. Set up a separate block per product type and mark it. And lay it on thin: two cross passes per section are enough. What we see day-to-day, most failed coatings don't fail on the product but on a contaminated applicator.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eWrap it in cloth, two cross passes per section\u003c\/h3\u003e\n\u003cp\u003eYou set the applicator block into the low-absorption applicator cloth and pull two overlapping cross passes per section — first lengthwise, then across, so no gap is left.\u003c\/p\u003e\n\u003cp\u003eThe condition is a clean, dry and degreased surface. For coatings you put 10 to 15 drops onto the wrapped \u003ca href=\"\/en\/products\/zvizzer-applikator-tuecher-weiss-applikatortuecher\"\u003eapplicator cloth\u003c\/a\u003e, work panel by panel and let it flash off for 1 to 3 minutes before you buff with a fresh microfibre. Work briskly — otherwise the coating dries on and pulls streaks.\u003c\/p\u003e\n\u003cp\u003eWith waxes and plastic care, the soft pad side can also go straight onto the material without a cloth. A thin, even layer is enough; after a short flash-off, follow up by hand with microfibre. Other \u003ca href=\"\/en\/collections\/zubehoer\"\u003eaccessories\u003c\/a\u003e like fresh microfibre cloths belong to the same step.\u003c\/p\u003e\n\u003ch3\u003eIt lays on, it doesn't polish\u003c\/h3\u003e\n\u003cp\u003eThe applicator block is a pure application tool: it spreads product evenly, but it removes no scratches, swirls or oxidation and it doesn't take the product off at the end.\u003c\/p\u003e\n\u003cp\u003eDefects belong before the applicator: correction and gloss are the job of a machine polish like the prep one-step polish ahead of the \u003ca href=\"\/en\/products\/zvizzer-paint-ceramic-coat-keramikversiegelung\"\u003eceramic sealant\u003c\/a\u003e, and buffing off the applied layer is the job of a clean microfibre. The block sits neatly in between — it brings the protective layer onto the prepped panel.\u003c\/p\u003e\n\u003cp\u003eThe second clear limit is cross-contamination. Once a coating has cured on the block, it can't be washed out fully anymore — then the block belongs to the coating and no longer to the wax. Keep things cleanly separated and one block lasts a long time. Mix them and you ruin the next sealant.\u003c\/p\u003e\n\u003ch3\u003eFor anyone laying on coatings and waxes\u003c\/h3\u003e\n\u003cp\u003eThe applicator block is the right call for anyone applying sealants, coatings, waxes or tyre care by hand who wants a controlled, even result with no wasted product.\u003c\/p\u003e\n\u003cp\u003eIt makes less sense for pure machine work: if you only polish, you need thermo foam pads, not a hand applicator. And for taking a polish off, a microfibre is the right tool, not the block. We often get questions from beginners about whether their first coating application by hand will come out right — with a block plus cloth and a thin coat, that's one of the most forgiving spots in the whole coating process.\u003c\/p\u003e\n\u003cp\u003eThe ZviZZer Ceramic Coatings sets each include one block plus cloth. If you want to apply several products separately, or you're replacing a worn-out block, you buy it here as a single piece. The one trick no manufacturer writes down: label your blocks by product — a felt-pen dot on the grip side saves you the detective work later when a sealant unexpectedly blotches.\u003c\/p\u003e","brand":"ZviZZer","offers":[{"title":"10 × 3 × 2 cm \/ 1 Stück \/ Einzeln","offer_id":57867609047375,"sku":"D1-ZVIZZER-CB00121","price":5.0,"currency_code":"USD","in_stock":true},{"title":"10 × 3 × 2 cm \/ 1 Stück \/ 3er-Set","offer_id":57882254672207,"sku":"D1-ZVIZZER-CB00121_3","price":13.0,"currency_code":"USD","in_stock":true},{"title":"10 × 3 × 2 cm \/ 1 Stück \/ 10er-Set","offer_id":57882254704975,"sku":"D1-ZVIZZER-CB00121_10","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-applikator-block-applikator-pad.png?v=1780785034","url":"https:\/\/detailing1depot.com\/en\/products\/zvizzer-applikator-block-applikator-pad","provider":"Detailing1","version":"1.0","type":"link"}