{"product_id":"zvizzer-uc-1000-ultrafine-cut-gruen-finish-politur","title":"UC 1000 \"Ultrafine Cut\" finishing polish (Green)","description":"\u003ch2 id=\"speakable-headline\"\u003eRemove swirls and holograms and seal the paint\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWhat is the ZviZZer UC 1000 Ultrafine Cut? A water-based finishing polish with the finest aluminium-oxide grain and a built-in sealant that removes the finest swirls and holograms and protects the paint for months in the same pass. Not for heavy correction of deep scratches and not as a stand-alone polish on heavily weathered paint.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eZviZZer UC 1000 Ultrafine Cut\u003c\/strong\u003e is a water-based finishing polish from ZviZZer, marked Green in the five-step colour system and therefore the finest ultra-fine stage. Its finest, homogeneous aluminium-oxide grain polishes out completely clear, while an included ceramic emulsion seals the paint at the same time. That folds the last bit of depth and months of protection into one pass. It's silicone- and solvent-free and made in Germany.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh gloss and sealant in one step.\u003c\/strong\u003e The UC 1000 removes the finest swirls and holograms and lays down a ceramic sealant in the same pass that, per the manufacturer, protects the paint for months. You save the otherwise separate sealing step after polishing, and you finish one side of the car in about 20 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe finest grain for that last bit of depth.\u003c\/strong\u003e Its latest-generation homogeneous aluminium-oxide grain works so fine that you get a streak-free wetlook without laying down new micro-scratches. A pea-sized amount covers one pad face, and the 250 ml bottle is good for around 8 to 10 finishing passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for dark and soft paints.\u003c\/strong\u003e On dark black or soft Japanese clearcoat, where every hologram haze shows up straight away, the UC 1000 really shows its strength. It's tuned for all paints, including scratch-resistant ones as well as fresh and cured paint, and it works water-based without silicone or solvents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e The most common mistake with a finishing polish that seals is to wipe down with a degreaser afterwards. If you go over the paint with isopropanol after the UC 1000, you wipe the fresh ceramic layer right back off and the months of protection are gone. Work the polish out on a very soft green pad at low speed and wipe the residue off with a dry microfibre towel only. On a black 2026 paint, one pass left a mirror-smooth wetlook.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eWork it out on a soft green pad at low speed\u003c\/h3\u003e\n\u003cp\u003eYou spread the UC 1000 out pea-sized at around 1,000 rpm, then work it out at about 1,600 rpm with light pressure until a clear, deep gloss stands.\u003c\/p\u003e\n\u003cp\u003eThe key is a very soft finishing pad. The colour-matched green ultra-soft pad brings the fine grain into play without creating cut of its own. A harder pad would disturb the sealing effect and leave fine holograms behind. Work in sections of about 40 by 40 centimetres, overlap each pass by half and keep the pad moving at all times.\u003c\/p\u003e\n\u003cp\u003eThe prerequisite is clean, already-corrected paint: washed, decontaminated and free of coarser defects. The UC 1000 is the last step, not the first. Residue of wax or polishing oil from an earlier pass otherwise settles into the pad and disturbs the sealant.\u003c\/p\u003e\n\u003cp\u003eWhich pad suits which polish is one of the most common questions before the first pass. For the UC 1000 the rule is: the softer, the better. A green ultra-soft pad or a fine microfibre finishing pad brings the grain out cleanly. Foam pads with a cut structure belong to the coarser stages, not the finish.\u003c\/p\u003e\n\u003cp\u003eThe amount of product matters: because the UC 1000 seals on its own, it lives on little product and clean break-down technique. Three squirts on the pad create heat and a smearing film that lays the ceramic component down unevenly. A pea-sized amount per section is enough, and after two to three sections you tap the pad out.\u003c\/p\u003e\n\u003cp\u003eBelow 15 degrees paint temperature the sealant works more sluggishly and the polishing film breaks open later. Then a touch more speed helps rather than more product. In direct sun, on the other hand, you wait until the panel is in the shade and hand-warm, otherwise the polish dries on before it's worked out clear.\u003c\/p\u003e\n\u003cp\u003eCheck the result in the right light. An LED spot light at an angle to the paint shows swirls and holograms clearly, while daylight hides them. Pull the panel down with a dry towel to check, never with isopropanol, and only then judge whether a second, light pass is needed.\u003c\/p\u003e\n\u003ch3\u003eFinest swirls yes, deep scratches no\u003c\/h3\u003e\n\u003cp\u003eThe UC 1000 removes the finest swirls, holograms and the typical spider-web scratches under artificial light completely. With deep scratches, though, the kind you clearly feel with a fingernail, it lacks the bite.\u003c\/p\u003e\n\u003cp\u003eIts core area is the last percent: the step from already well-polished paint to a flawless concours mirror. On dark paint that still shows a fine haze after a medium polish, it pulls out exactly the leftover depth that makes a show-car finish, and protects the result at once.\u003c\/p\u003e\n\u003cp\u003eThe homogeneous grain is the reason for this clean finish. Unlike a mixed abrasive grain, it doesn't break abruptly but works itself out evenly. That way the UC 1000 leaves no micro-scratches of its own even on sensitive, soft clearcoat, which is half the battle with a fine finishing polish.\u003c\/p\u003e\n\u003cp\u003eThe limits are clearly tiered. When deep scratches sit in the paint, you start with the strong \u003ca href=\"\/en\/products\/zvizzer-hc-4000-heavy-cut-rot-schleifpolitur\"\u003ecutting compound\u003c\/a\u003e, go over the \u003ca href=\"\/en\/products\/zvizzer-fc-2000-fine-cut-gelb-finish-politur\"\u003eFC 2000 Fine Cut\u003c\/a\u003e as an intermediate stage and only add the UC 1000 on top at the end. On heavily weathered, matte paint a pure finishing polish on its own is out of place, because it lacks the correction power.\u003c\/p\u003e\n\u003cp\u003eA second limit concerns the protection itself: the built-in sealant lasts months per the manufacturer, but doesn't replace a full ceramic coating with a multi-year lifespan. If you want maximum durability, you use the UC 1000 for the gloss and lay a dedicated coating on top afterwards, once the polish layer has cured after a few hours.\u003c\/p\u003e\n\u003cp\u003eA question that reaches us often is whether a fine polish works as a pure final polish. With the UC 1000 that's exactly the point: it's meant as a finishing close, not as a workhorse for correction. Use it as your only polish and you do get gloss and protection, but no defect removal beyond the finest swirls.\u003c\/p\u003e\n\u003ch3\u003eFor the show-car polisher, not for heavy correction\u003c\/h3\u003e\n\u003cp\u003eThe UC 1000 is the right call when you're after that last bit of gloss and want to protect the paint in one go, instead of applying a separate sealant after polishing.\u003c\/p\u003e\n\u003cp\u003eIt's less suited to two cases: heavy correction of neglected paint, where the bite is missing, and the quick single-step prep of a daily driver, for which a one-step polish is the more honest choice. A customer told us, in so many words, that she first misread the UC 1000 as an all-round polish; it only plays its strength as a finishing step.\u003c\/p\u003e\n\u003cp\u003eEconomically the UC 1000 pays off above all for anyone who polishes in multiple stages anyway. The 250 ml bottle covers around 8 to 10 finishing passes, the 750 ml bottle is meant for season-long continuous use. If you both correct and finish on a regular basis, you're better off with the graded ZviZZer system from Pre Cut to Ultra Fine than with a single polish. You'll find the matching stages in our \u003ca href=\"\/en\/collections\/politur\"\u003epolishes\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eIn the workflow the UC 1000 sits right at the back and replaces the separate sealant for many people. If you want even more durability, you let the polish layer cure for a few hours first and then lay a full ceramic coating on top. Applying both right after one another doesn't work, because the coating doesn't bond cleanly to the still-fresh sealing layer.\u003c\/p\u003e\n\u003cp\u003eThe one point hardly anyone watches: because the UC 1000 seals on its own, it's the only step after which you don't touch the paint again. Always lay it on as the very last layer and plan no wash and no wax straight afterwards, otherwise you strip the fresh ceramic layer off again before it has cured. It's exactly this order-of-steps mistake that explains why some people miss the deep gloss again after the first wash, even though the polishing worked flawlessly.\u003c\/p\u003e\n","brand":"ZviZZer","offers":[{"title":"250 ml \/ Einzeln","offer_id":57867580047695,"sku":"D1-ZVIZZER-ST00025010UC","price":33.0,"currency_code":"USD","in_stock":true},{"title":"750 ml \/ Einzeln","offer_id":57867580080463,"sku":"D1-ZVIZZER-ST00075010UC","price":84.0,"currency_code":"USD","in_stock":true},{"title":"250 ml \/ 3er-Set","offer_id":57882253033807,"sku":"D1-ZVIZZER-ST00025010UC_3","price":97.0,"currency_code":"USD","in_stock":true},{"title":"250 ml \/ 10er-Set","offer_id":57882253066575,"sku":"D1-ZVIZZER-ST00025010UC_10","price":324.0,"currency_code":"USD","in_stock":true},{"title":"750 ml \/ 3er-Set","offer_id":57882253099343,"sku":"D1-ZVIZZER-ST00075010UC_3","price":252.0,"currency_code":"USD","in_stock":true},{"title":"750 ml \/ 10er-Set","offer_id":57882253132111,"sku":"D1-ZVIZZER-ST00075010UC_10","price":840.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-uc-1000-ultrafine-cut-gruen-finish-politur.png?v=1781632403","url":"https:\/\/detailing1depot.com\/en\/products\/zvizzer-uc-1000-ultrafine-cut-gruen-finish-politur","provider":"Detailing1","version":"1.0","type":"link"}