SONAX PROFILINE GlassCleaner glass cleaner (concentrate) 10l

Professional glass cleaning in bulk — SONAX PROFILINE GlassCleaner concentrate

What is the SONAX PROFILINE GlassCleaner? The highly concentrated glass cleaner concentrate for professional use — streak-free cleaning of all vehicle glass, mirrors and glass surfaces, available in 10 litre, 25 litre and 200 litre containers for high-throughput operations.

In car washes, detailing operations and fleet workshops the glass cleaner you get through is huge: every vehicle has several square metres of glass that need cleaning inside and out during the job. You can't cover professional demand economically with 500 ml bottles. The SONAX PROFILINE GlassCleaner is the concentrate built for exactly that: a highly concentrated glass cleaner formula in bulk containers — 10 litre, 25 litre and 200 litre — that diluted gives you many times the amount of ready-to-use glass cleaner. Streak-free cleaning on windscreens, side windows, rear windows, mirrors and glass of all kinds — professional, economical, and available in commercial volumes.

• Highly concentrated glass cleaner concentrate for economical bulk demand — 10 L, 25 L, 200 L. The SONAX PROFILINE GlassCleaner is formulated as a concentrate that diluted gives many times the original volume. For professional operations running many vehicles a day, the concentrate format works out far cheaper than buying ready-to-use glass cleaner in small bottles. The three container sizes fit different operation sizes: from the small detailing shop (10 litre) to the big fleet or car wash (200 litre).
• Streak-free cleaning on every type of glass — inside and out. The SONAX PROFILINE GlassCleaner formula is dialled in for a streak-free finish on vehicle glass: rain and limescale streaks on outer windows, greasy film and fingerprints on inner glass, silicone residue from window rubbers on the glass surface — the GlassCleaner pulls all of it off completely and without residue. On the inside of the glass the cleaning power really counts: a greasy film on the inside of the windscreen badly affects visibility through light reflection.
• Fast acting and fast drying — no annoying second wipe needed. The SONAX PROFILINE GlassCleaner dries fast and leaves no residue that would need a second wipe. In a professional shop the work pace is decisive — a glass cleaner that dries streak-free on the first pass saves several minutes per vehicle compared with products you have to go back over.

Detailing1's tip from the shop: Decant the SONAX PROFILINE GlassCleaner from the bulk container straight into SONAX PROFILINE Sprayboy spray bottles at the right dilution — and write the dilution ratio on the bottle. Dilute it a touch stronger for outside cleaning, run it more concentrated for stubborn interior grime (greasy film, smoker's film). When you do the inside of windscreens, wipe the glass crosswise with the SONAX PROFILINE MicrofaserTuch Glas — first pass across, second pass top to bottom — that stops the greasy film smearing and gets you a streak-free finish. Never work in direct sunlight on hot glass — the cleaner flashes off too fast and leaves streaks.

Formula and concentrate strength — what sets the SONAX PROFILINE GlassCleaner apart

Before you start cleaning, it pays to look at the glass in raking light — ideally with a detailing light or under room lighting from a shallow angle. That makes all the streaks, the typical interior greasy film and limescale spots show up, the ones you easily miss without that check and that catch you out after cleaning. A quick look before and after tells you straight away whether the result really is streak-free — or whether a second pass is needed.

The glass cleaner formula of the SONAX PROFILINE GlassCleaner is based on a surfactant-alcohol blend tuned to the specific types of grime found on vehicle glass. Outer windows are mainly loaded with inorganic residue: limescale from rainwater, mineral dust deposits, fine dust and oil-mist aerosols from driving. Inner windows have a different grime profile: the typical interior greasy film comes from outgassing of plastics and foams inside the vehicle, made worse by smoke, body oils from hands and hair, plus cleaning-agent aerosols. The GlassCleaner pulls both types off effectively.

The alcohol content in the formula drives the fast evaporation after you lay it on — that stops streaking from the product sitting too long or drying unevenly. The surfactants lift the grease-based and mineral grime, emulsify it and let you wipe it all off with no residue. The surfactant-to-alcohol ratio is balanced so the GlassCleaner still flows well and works fast at low outside temperatures (winter use) without freezing on cold glass.

Another plus of the concentrated formula: in concentrate form the product is more stable and stores better than ready-diluted glass cleaner. Ready-diluted glass cleaners can lose effectiveness over long storage in poor conditions (frost, direct sunlight). The concentrate stays fully effective over many months and through changing temperatures — a clear advantage for operations that keep larger stocks.

As a concentrate the SONAX PROFILINE GlassCleaner is designed to be diluted with water. The typical dilution ratio for normal glass grime, depending on concentration level and dirt load, runs from 1:5 to 1:20 — so one litre of concentrate gives you 5 to 20 litres of ready-to-use glass cleaner. With a 10 litre container that means a stock of 50 to 200 litres of ready-to-use product — and at about 50–100 ml per vehicle for inside and outside cleaning, a 10 litre container covers 500 to over 2000 vehicle jobs.

Dilution and use — the right concentration for different jobs

The right dilution of the SONAX PROFILINE GlassCleaner depends on how dirty the glass is and where you're using it. For standard cleaning of outer windows with normal road grime (dust, rain spots, light grease marks) a higher dilution does the job — less concentrate, more water. For tougher grime like heavy greasy film on inner glass, the typical smoker's-car coating or silicone residue from seal rubbers, a lower dilution (more concentrate) works better — fewer wipes, faster result.

In a professional shop a two-stage dilution system makes sense: one spray bottle at standard dilution for normal cleaning, a second bottle with a stronger mix for stubborn interior grime. Both bottles get filled from the same bulk container, so you stay flexible without swapping product. With the SONAX PROFILINE Sprayboy as the standard spray bottle, the GlassCleaner system slots straight into the rest of your SONAX PROFILINE setup.

For car washes and automatic wash systems there are dedicated dosing units that draw the glass cleaner straight from the 200 litre container and feed it into the system at the right concentration. The SONAX PROFILINE GlassCleaner is compatible with this kind of dosing gear — the formula is tuned to deliver an optimal result even with machine application and rinse-off afterwards. For manual work the spray bottle method is the recommended way to go.

GlassCleaner vs. Glass Detailer — the right glass product for each job

In the SONAX PROFILINE glass cleaning range, alongside the SONAX PROFILINE GlassCleaner there's also the SONAX PROFILINE Glass Detailer Concentrate — two products that differ in concept and use. The GlassCleaner is the base cleaner concentrate for full glass cleaning: it pulls off all grime and leaves a clean glass surface with no coating. The Glass Detailer Concentrate is a specialist for the last step: it cleans and seals at the same time, gives the glass a hydrophobic treatment after cleaning and improves the way water runs off the screen.

The order in the workflow is clear: first clean and degrease fully with the GlassCleaner, then optionally finish the glass with the Glass Detailer Concentrate. Laying the Glass Detailer onto glass that isn't fully degreased leads to uneven sealing and streaking. The two products are complementary, not interchangeable — the GlassCleaner as the cleaning base, the Glass Detailer as the finishing layer.

For operations that want to run just one glass product, the SONAX PROFILINE GlassCleaner is the right base: it covers 90% of glass cleaning needs — clean, streak-free windows with no coating. The SONAX PROFILINE Acryl+GlasReiniger, on the other hand, is built for special needs like acrylic glass, Plexiglas and acrylic glazing — not as a replacement for the GlassCleaner, but as an add-on for jobs with sensitive plastic glazing.

Material compatibility and limits — what the GlassCleaner can handle and what it can't

The SONAX PROFILINE GlassCleaner is approved for all standard vehicle glass types: toughened safety glass (ESG), laminated safety glass (VSG), tinted glass, heated rear windows and normal side windows. The formula is alkali-tolerant and clear-coat compatible, and can also be used on surfaces next to body paint — the GlassCleaner won't damage the colour pigments or the clear coat if it accidentally gets onto paintwork. For targeted cleaning, though, keep it mainly on glass surfaces.

For plastic glazing made of acrylic glass (PMMA) or polycarbonate (PC) — as found in motorcycle fairings, classic-car screens, boat tops or special vehicle bodies — the SONAX PROFILINE Acryl+GlasReiniger is the better pick. Harsh surfactants and alcohols in normal glass cleaners can attack plastic glazing over time, dull it or make it brittle. The SONAX PROFILINE GlassCleaner is optimised for real glass, not for plastic glazing.

On coated glass — e.g. after laying down the SONAX PROFILINE Glass Detailer Concentrate or another glass sealant — the GlassCleaner is fine to use too: the glass sealant stays intact under regular cleaner use, as long as no aggressive solvents are in the product. On sealed glass the GlassCleaner dries even faster, since the hydrophobic coating speeds the cleaner running off — that improves the result day-to-day and often needs less product than on unsealed glass. For looking after films (PPF, tint film) don't spray the GlassCleaner straight onto the film — put it on the cloth first and then onto the surface, to avoid lifting the edges.

Buying the SONAX PROFILINE GlassCleaner — container size and which one to pick

The SONAX PROFILINE GlassCleaner comes in three container sizes: 10 litre for smaller operations and detailing studios, 25 litre for mid-sized detailing shops and car washes, 200 litre as a drum for large operations, fleets and car washes with very high daily throughput. Pick the container size by your throughput: at 10–20 vehicles a day the 10 litre container is the economical choice, at 50–100 vehicles a day the 25 litre. The 200 litre drum only makes sense with very high throughput and enough storage space.

For mobile detailers carrying the GlassCleaner concentrate in the van, the 10 litre container is easy to handle and gives a big stock for many weeks of work. The container with its plastic drain tap can be mounted right in the van or on the detailing cart — topping up the spray bottles each day goes quick and clean, no lifting and tipping the container.

For mobile detailers carrying the GlassCleaner concentrate in the van, it also pays to label the spray bottles with a waterproof marker or stickers — working on the road or at a customer's place, mixing up cleaners can quickly lead to results you didn't want. If you pre-portion several SONAX PROFILINE products into spray bottles at once, use a separate colour label or a separate Sprayboy type for each product to avoid mix-ups. An established labelling system saves time and mistakes in the daily grind.

The SONAX PROFILINE GlassCleaner concentrate is an economical base product that shouldn't be missing from any professional detailing operation. The concentrate logic — buy once, use many times over — makes it the cheapest glass cleaner approach for operations, and the professional, streak-free cleaning with no second wipe is the quality that counts day-to-day.