Frost: It's the dirt under the ice that scratches your windscreen. Read the guide

Today: Your screen wants a soft cloth, not glass cleaner. Shop cloths

Storage: Put wheels away clean and sealed for winter. Read the guide

From the blog: Where road salt clings to the underbody. Read the guide

Model Y: What the touchscreen can take when you clean it. Read the guide

Before winter: A paint sealant keeps salt and grime at bay. See sealants

Best seller: COLOURLOCK "Pol Star" cleans fabric, leather and Alcantara. View product

Restock: COLOURLOCK "Fresh Up" neutralises odours in the cabin. View product

Advice: De-icer, cleaner or sealant for your glass? Ask us. Ask on WhatsApp

Shipping: Free DHL shipping in Germany from 89 euros. Shipping info

Support: Where is my order? Tracking, invoice, returns. To the help centre

Buyer protection: Real reviews on Trusted Shops. Read reviews

Car lifts

(5 products)
At Detailing1, the car lift category groups the lifting gear for vehicle detailing and wheel service: two-post lifts with the wheels hanging free, four-post lifts with runways, and scissor lifts that drop flush into the floor. Four planning figures decide the choice: type, load capacity in tonnes, usable ceiling height and how much the concrete floor can take. On top of that, commercial use brings a yearly inspection requirement.

Display
View as

  • Detailing1 Hero: Waschen & Reinigen — Frühjahrsputz mit Autoshampoo (Desktop)

    Working professionally?

    Detailing1 PRO: trade terms for professional users.

    Discover PRO
  • Detailing1 hero: foam sprayer, foam pre-wash without pumping, road film after rain (desktop)

    Technical question before buying?

    Message us on WhatsApp for honest advice before you order.

    Start a WhatsApp chat
  • Car lifts for detailing and wheel work: plan them properly

    What does a car lift need to deliver for detailing? It has to carry the vehicle safely, give you access to the underbody and fit the space you've got. What matters is the lift type, lifting capacity, ceiling height and foundation. This page sorts out the planning factors before you pick a model.


    Car lifts are lifting units that raise a complete vehicle and hold it at working height until the job underneath is done. The car is carried either by the frame on four lifting arms, under the wheels on runways, or across its full footprint on a platform. Four figures decide the choice: the lift type, the lifting capacity in tonnes, the ceiling height available and the load-bearing capacity of the floor. Without those four values, any model comparison is premature.

    • The lift type follows the job, not the price. Two posts leave the wheels free, four posts carry the car on its own wheels, a scissor lift raises it across its footprint and then disappears into the floor. If you work a lot on wheel arches and sills, you'll choose differently from someone who changes wheels.
    • Work out lifting capacity with headroom, not to the last kilo. Check the vehicle's actual weight in the load condition you plan for. The capacity required, permissible load distribution and lifting points depend on the vehicle and the manual for the lift you choose.
    • The floor is the hardest limit in this category. Floor build-up and foundation have to meet the requirements of the lift you choose; the relevant operating manual is what counts. A surface that looks solid doesn't prove on its own that the floor is suitable.

    Detailing1's tip from the shop: We often get enquiries where the ceiling height has already been measured and the lift still doesn't fit. The reason is nearly always the same detail: the measurement went to the ceiling, but what's in the way is whatever hangs below it. The track of a sectional door runs right across the room, and lights, heating pipes and cable trunking eat up a few more centimetres. So measure the lowest component above where the lift will stand. Check the lift height possible for your vehicle against the vehicle dimensions and the specs of the lift you choose. A photo of the spot with a folding rule against the wall answers more questions than any data sheet.


    Three lift types for three different ways of working

    Two-post, four-post and scissor lifts differ in where they pick up the vehicle and what stays freely accessible.

    The two-post lift puts four arms under the lifting points on the vehicle's frame. The wheels hang free, and wheel arches, brakes, sills and the whole underbody are wide open. For wheel work and cleaning out the arches, there's no more direct access than this.

    The four-post lift works the other way round. The car drives onto two runways and stays on its own wheels the whole time. No setting arms on specific points, and the wheels stay loaded. If you do need them free, add a wheel-free jack that raises the axles off the runway.

    Scissor lifts raise a platform on crossed lever arms. They don't need posts next to the car, can be sunk flush into the floor and free up the space again once they're down. They come as short-rise versions with about one metre of lift for wheel work and as full-rise versions that go up to standing height.

    Within scissor lifts there are two ways to install them. The flush-mounted version sits level with the floor and needs a recess in the concrete — a decision that stays put. The surface-mounted version stands on the floor and can be moved within limits, but the ramp and base frame create a lip that every wheel has to roll over.

    For detailing, side access is what counts most. With a scissor lift you can walk freely round the car; with two posts you get the wheels at hand height instead. Both work — they just put the comfort in different places.

    Whether a trolley jack with suitable axle stands is enough for wheel changes depends on the vehicle, the job and the manufacturer's specifications. The models for that are under Car jack.

    Lifting capacity with headroom, not at the limit

    Lifting capacity isn't sized for the car currently on your drive, but for the heaviest one that will ever go up on it.

    What counts is the vehicle weight in the planned load condition. Check the figures in the vehicle documents and the permissible pick-up on the lift you choose.

    With electric vehicles, check the permissible vehicle pick-up just as you would with any other car. Weight, load distribution and lifting points have to match the specs of the lift you choose; the drivetrain alone doesn't dictate a general minimum capacity.

    Then there's load distribution. Check the permissible distribution and vehicle position against the manual for the lift you choose.

    The permissible arm position also depends on the operating manual for the lift you choose. Rated capacity alone doesn't replace checking how the vehicle is picked up.

    The lifting points themselves are the second half of the same question. They're in the vehicle's handbook, not something you go by feel. Whether adapters are needed and which pad fits depends on the specifications for the vehicle and the lift you choose.

    Ceiling height and lift height narrow the choice

    Usable height comes from three values: the lowest component above where the lift stands, the height of the vehicle and the overall height of the lift itself.

    Check the room height you need against the vehicle dimensions, the planned working height and the dimensions of the lift you choose.

    With two-post lifts, the design adds to this. The common version links the two posts with an overhead beam that carries chains and lines. That keeps the floor clear but costs height. The alternative runs the link at the bottom, under a flat drive-over plate or base frame: the space above stays open, but there's a threshold between the posts that every wheel has to roll over.

    Compare the overall height and possible lift height of the specific models. With scissor lifts, too, the vehicle dimensions and planned working height have to suit the space available.

    Besides height, floor area counts. Check access, door opening and room to move around the specific vehicle, as well as the installation specs of the lift you choose. With two-post lifts, the approach to the planned vehicle position has to work as well.

    So if you're planning a lift for your own workshop, measure three things before comparing any prices: the clear height under the lowest obstacle, the width between the walls and the length left over once the car is in.

    The foundation comes before the lift

    The load on the floor depends on the type and planned installation of the lift you choose. What that floor can take decides the lift type, often before a single model is even in the running.

    The requirements for concrete, foundation dimensions and anchoring are in the operating manual of the lift you choose. If there's any doubt about the floor build-up, get its suitability professionally assessed before installation.

    If the floor build-up is unknown or there's underfloor heating, get the installation site's suitability professionally assessed before installation.

    For anchoring, the specs of the lift you choose apply. Anchor type, fitting and checks are planned according to the operating manual; if the base is uncertain, its suitability needs a professional assessment.

    The floor also has to be level. Posts are set plumb and shimmed where needed, otherwise the carriages run stiffly and the slide blocks wear unevenly. A fall towards the drain is fine as long as the manufacturer allows it.

    Water belongs in the plan. If you're working under the car with pressure, spray gets right into the power unit, and you need a drain that can handle the volume. Which class of machine suits that is under High-pressure cleaners. Power is the last item on the list: many post lifts run on 400-volt three-phase, some smaller scissor lifts on 230 volts.

    Mandatory inspections and servicing come with the lift

    A car lift is work equipment subject to mandatory inspection. If you lift commercially, plan the inspections in from the outset, because they come round every year.

    For commercial use in Germany, the Ordinance on Industrial Safety and Health (Betriebssicherheitsverordnung) applies. It requires an inspection before first use and then recurring inspections — in practice at least once a year — carried out by a person qualified to inspect. The results are documented, usually in an inspection log that stays with the lift.

    That ordinance doesn't apply in a private setting. The manufacturer's specifications are still binding, though, and your insurer will ask for exactly this proof if something goes wrong. The effort is manageable; not having the proof isn't.

    When you buy, CE marking, a declaration of conformity and a German-language operating manual are part of the scope of delivery. If one of them is missing, so is the basis for later inspections. Everyone who operates the lift gets instruction before first use — even if it's only two people.

    On top of that comes the daily visual check before lifting: are the arm locks engaged, do the safety catches click audibly into place, are chains and cables free of breaks, is hydraulic oil leaking anywhere? The check is part of the prep; the procedure follows the operating manual of the lift you choose.

    One buying criterion you won't find on any data sheet is spare parts supply. A lift you can get seal kits, slide blocks and control parts for will run for fifteen years. One without a service partner within reach grinds to a halt at the first leak and is hard to get inspected.

    When the investment really pays off

    What a lift is worth to you depends on the work you plan. Check whether the achievable working height and access to the vehicle suit that work; the specs of the lift you choose are what count.

    Flushing out wheel arches, degreasing sills, protecting the underbody, sealing the wheel wells, checking the car over before handover. These jobs are a pain with the car on the ground and so often get cut short. With the car in the air they become routine, because the light gets in and both hands are free.

    Checking lifting points, positioning the arms and making sure everything is seated securely are part of the prep for every vehicle. The procedure follows the operating manual of the lift you choose.

    Even for occasional wheel changes, check the right lifting equipment for the vehicle and the planned job. Pick-up, load capacity and the intended support have to match the manufacturer's specifications.

    Once wheels come off more often, it's worth looking at the second half of that job. Fitting and balancing equipment is under Tyre changers and needs planning together with the lifting equipment when it comes to space, not one after the other.

    Lifting equipment goes into the plan when the intended work requires raising the vehicle and the equipment requirements are met. You'll find an overview of equipment, lighting and storage by task under Workshop.

    And when it's decision time: send us the three numbers from this page — clear height, floor build-up and heaviest vehicle — plus a photo of the spot. We'll tell you which lift type fits your space, and we'll tell you just as plainly if a trolley jack is the more honest answer for your situation.

Car lifts